Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A microstructural analysis and tensile tests were performed on two oxide dispersion strengthened ferritic/martensitic steels. Dispersion hardening represents an interesting approach to improve the mechanical properties at elevated temperatures, as they are ...
Constant strain-rate and creep tests have been performed on poly-quasicrystalline specimens of the icosahedral Al-Cu-Fe system. Three temperatures (870, 960 and 1000 K) have been investigated by creep for samples predeformed at constant strain-rate before ...
AlPdMn quasi-crystalline specimens were deformed at low temperatures using a high-confining-pressure device. The microstructures, observed in each sample by transmission electron microscopy, depend on the deformation temperature and show that plastic defor ...
Reduced activation ferritic/martensitic (RAFM) steels are the reference structural materials for future fusion reactors. They have proven to be a good alternative to austenitic steels for their higher swelling resistance, lower damage accumulation and impr ...
Transient creep (1) tests have been performed at the yield point of icosahedral AlCuFe poly-quasicrystalline specimens in order to investigate the actual causes of this phenomenon. The experimental results strongly suggest that the yield point occurrence i ...
Plastic deformation of Al-Pd-Mn icosahedral quasicrystals has been achieved at room temperature using a high-confining-pressure medium. The deformation microstructure, investigated by transmission electron microscopy, is characterized by long straight band ...
The purpose of this study was to investigate the barrier efficiency of a thick thermal spray deposit on the alpha-titanium alloy, Ti-5Al-2.4Sn against hydrogen penetration. Therefore, a duplex coating has been applied by plasma spraying using a Sulzer Metc ...
Radiation effects on the mechanical behavior and the microstructure of pure her, titanium polycrystals have been investigated. Results have been analyzed in the frame of a dispersed obstacle hardening model and compared to those previously obtained for pur ...
A series of polyquasicrystalline ingots with the nominal composition Al63.6Cu24.0Fe12.4 has been prepared by conventional drop casting and subsequent annealing at 1088 K for 24 h. Compression specimens prepared from the different ingots have been deformed ...
In order to preserve the conditions for an environmentally safe machine, at present the selection of materials fur the structural components of fusion reactors is made not only on the basis of adequate mechanical properties, behaviour under irradiation, an ...
