Stefano Mischler

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (90)

Modeling Current Transients in a Reciprocal Motion Tribocorrosion Experiment

Stefano Mischler, Anna Neus Igual Muñoz, Shoufan Cao

Tribocorrosion of passivating metals is a dynamic phenomenon causing degradation of materials by a combination of mechanical wear and electrochemical dissolution. The mechanical action typically produces a local removal of particles, metal as well as oxide ...

ELECTROCHEMICAL SOC INC2021

A lubricated tribocorrosion model incorporating surface roughness

Stefano Mischler, Shoufan Cao

This study presents an improvement of an existing tribocorrosion model developed for passive CoCrMo alloys. This model is based on an empirical formalism established by Duncan Dowson in his pioneering works on the relation between wear and elasto-hydrodyna ...

2021

Tribological properties of gold matrix composite coatings with carbon nanocapsules containing ionic liquid lubricants

Stefano Mischler, Anna Neus Igual Muñoz

Self-lubricating, gold matrix composite coatings were produced by electrochemical codeposition of carbon nanocapsules filled with ionic liquid (IL) from a colloidal galvanic bath on a nickel electrode. The tribological response of the composite coatings wa ...

ELSEVIER2020

Re-entry survival analysis and ground risk assessment of space debris considering by-products generation

Pénélope Leyland, Stefano Mischler, Seong-Hyeon Park

Space debris that re-enter the Earth's atmosphere can be partially or fully ablated along the trajectory path after hitting the atmosphere layers, once these become denser (approximately below 82 km). This paper combines re-entry survival analysis to by-pr ...

2020

Laser coating of a Zr-based metallic glass on an aluminum substrate

Roland Logé, Stefano Mischler, Jamasp Jhabvala, Alejandro Roda Buch, Navid Sohrabi

Cladding of a Zr-based metallic glass (MG) on an aluminum substrate was conducted using a layer-wise laser additive manufacturing (AM) method, leading to relative densities higher than 99%. The thickness of the cladding was about 300 μm. The effect of lase ...

2020

Fretting-corrosion behavior of electroless Ni-P/Ni-P-TiO2 coatings obtained on AZ91D magnesium alloy by a chromium-free process

Stefano Mischler, Angela Bermudez Castañeda

Ni-P electroless coatings are widely applied for protection of magnesium alloys and other materials due to the low energy consumption of the process and high resistance to corrosion and wear, properties that can be improved with the incorporation of partic ...

ELSEVIER2020

Tribocorrosion of a CoCrMo alloy in sulfuric acid - Glycerol mixtures

Stefano Mischler, Shoufan Cao

This work reports on the tribocorrosion properties of a CoCrMo alloy sliding under imposed passive potential against alumina in sulfuric acid-glycerol mixtures exhibiting different viscosities and thus, in principle, lubrication properties. As expected, we ...

ELSEVIER SCIENCE SA2020

Influence of Bovine Serum Albumin (BSA) on the Tribocorrosion Behaviour of a Low Carbon CoCrMo Alloy in Simulated Body Fluids

Stefano Mischler, Shoufan Cao, Choshun Yoneyama

Tribocorrosion, as the interaction between mechanical wear and electrochemical corrosion, has been found to be the main problem causing the failure and limiting the lifetime of metal-on-metal artificial hip joints. Better understanding of the tribocorrosio ...

2020

Tribological behaviour of galvanic gold coatings reinforced with silica nanoparticles

Stefano Mischler, Anna Neus Igual Muñoz

Electroplated composite Au/SiO2 coatings on a nickel substrate have been produced by dispersing an emulsion of silica nanoparticles (20 nm in diameter) in an industrial hard-gold bath. The tribological behaviour of the Au/SiO2 coatings with different SiO2 ...

2020

An Overview of Serum Albumin Interactions with Biomedical Alloys

Stefano Mischler, Anna Neus Igual Muñoz, Oksana Klok

Understanding the interactions between biomedical alloys and body fluids is of importance for the successful and safe performance of implanted devices. Albumin, as the first protein that comes in contact with an implant surface, can determine the biocompat ...

2020

Page 3 sur 9

Fretting-corrosion behavior of electroless Ni-P/Ni-P-TiO2 coatings obtained on AZ91D magnesium alloy by a chromium-free process

Stefano Mischler, Angela Bermudez Castañeda

ELSEVIER2020

Tribocorrosion of a CoCrMo alloy in sulfuric acid - Glycerol mixtures

Stefano Mischler, Shoufan Cao

ELSEVIER SCIENCE SA2020

Influence of Bovine Serum Albumin (BSA) on the Tribocorrosion Behaviour of a Low Carbon CoCrMo Alloy in Simulated Body Fluids

Stefano Mischler, Shoufan Cao, Choshun Yoneyama

2020