Publications de Benedikt Moser

FCC Physics Opportunities: Future Circular Collider Conceptual Design Report Volume 1

Pierluigi Bruzzone, Jan Steggemann, Elena Graverini, Jean-Michel Sallese, Thomas Rizzo, Luca Rossi, Rui Ning Wang, Fabio Avino, Xavier Buffat, Tatiana Pieloni

We review the physics opportunities of the Future Circular Collider, covering its e(+)e(-), pp, ep and heavy ion programmes. We describe the measurement capabilities of each FCC component, addressing the study of electroweak, Higgs and strong interactions, ...

2019

Tensile strength of axially loaded unidirectional Nextel 610 (TM) reinforced aluminium: A case study in local load sharing between randomly distributed fibres

Andreas Mortensen, Andreas Rossoll, Benedikt Moser

The tensile failure of unidirectional alumina fibre reinforced aluminium is studied in uniaxial loading along the fibre axis. The tensile strength is measured as a function of matrix yield strength, which is varied by varying the testing temperature, from ...

2012

In situ flow stress of pure aluminium constrained by tightly packed alumina fibres

Andreas Mortensen, Ludger Weber, Andreas Rossoll, Benedikt Moser

The in situ matrix flow stress of continuous fibre-reinforced aluminium is measured in tension along the fibre axis. We use a new, tighter, estimate for the effect differential Poisson contraction between fibres and matrix and take into consideration nonli ...

Elsevier2009

Measurement of damage evolution in continuous ceramic fibre-reinforced metals by acoustic emission

Andreas Mortensen, Ludger Weber, Andreas Rossoll, Benedikt Moser

Internal damage in uniaxial continuous alumina fibre-reinforced aluminium is measured by acoustic emission during tensile straining in the fibre direction. Over most of the loading history spatially uncorrelated fibre fragmentation occurs, consistent with ...

2008

Strength and fracture of Si micropillars: A new scanning electron microscopy-based micro-compression test

Johann Michler, Laura Barbieri, Benedikt Moser

Cambridge, Cambridge University Press2007

Damage accumulation during cyclic loading of a continuous alumina fibre reinforced aluminium composite

Andreas Mortensen, Ludger Weber, Benedikt Moser

Fibres fracture gradually during the fatigue cycling of continuous alumina fibre reinforced aluminium. The number of fibre breaks increases linearly with the logarithmic cycle number, depends on the maximum stress and the stress ratio, and agrees with publ ...

2005

Longitudinal deformation of fibre reinforced metals: Influence of fibre distribution on stiffness and flow stress

Andreas Mortensen, Andreas Rossoll, Benedikt Moser

A computational analysis of the longitudinal deformation of continuous fibre reinforced metals is presented. Elastic and elastic-plastic matrix behaviour are considered. Analytical approaches are confronted with finite element analyses (FEA) for varying fi ...

2005

Deformation and fracture of continuous alumina fibre reinforced aluminium composites

Benedikt Moser

EPFL2002