Caroline Jacq

Cette personne n’est plus à l’EPFL

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (24)

Sensors and packages based on LTCC and thick-film technology for severe conditions

Peter Ryser, Thomas Maeder, Caroline Jacq

Reliable operation in harsh environments such as high temperatures, high pressures, aggressive media and space, poses special requirements for sensors and packages, which usually cannot be met using polymer-based technologies. Ceramic technologies, especia ...

2009

Thick-film multi-DOF force / torque sensor for wrist rehabilitation

Thomas Maeder, Caroline Jacq, Roger Gassert, Olivier Lambercy, Barthélémy Lüthi

A complete six–degree-of-freedom (6-DOF) force / torque sensor has been designed and fabricated for wrist rehabilitation applications, with the focus laid on simple, straightforward manufacturing processes. This paper details the mechanical design, 3D-mode ...

Elsevier2009

Load sensing surgical instruments

Peter Ryser, Thomas Maeder, Caroline Jacq

Force and pressure sensing technology applied to smart surgical instruments as well as implants allow to give a direct feedback of loads to the surgeon lead to better reliability and success of surgical operations. A common technology used for sensors is l ...

Springer Verlag2009

Formulation and processing of screen-printing vehicles for sacrificial layers on thick-film and LTCC substrates

Peter Ryser, Thomas Maeder, Caroline Jacq, Yannick Sébastien Fournier

Ceramic technologies such as thick-film and LTCC (Low Temperature Cofired Ceramic) are excellent platforms for the fabrication of mesoscale devices such as sensors, actuators, microreactors and MEMS packaging. This work presents two alternative screen-prin ...

2008

Study of the impact of high-voltage trimming on several characteristics of model TFRs and their stability

Peter Ryser, Thomas Maeder, Caroline Jacq, Niklaus Johner

In this work we study in more details the impact of voltage trimming on different characteristics of model thick-film resistors (TFRs). Two series of RuO2-based TFRs with different conducting grain sizes are studied. As the composition of model pastes is c ...

2007

Subsolidus phase equilibria in the PbO-poor part of the TiO2–PbO–SiO2 system and its application in low-temperature thick-film dielectrics

Thomas Maeder, Caroline Jacq, Marko Hrovat

Subsolidus equilibria in the PbO-poor part of the TiO2–PbO–SiO2 diagram were studied with the aim of investigating possible applications for low-temperature thick-film dielectrics. The tie lines are between PbTiO2 and PbSiO3, and between PbTiO3 and SiO2. T ...

2006

Properties and stability of thick-film resistors with low processing temperatures - effect of composition and processing parameters

Claudio Grimaldi, Thomas Maeder, Caroline Jacq, Sonia Vionnet Menot

In this work, the properties (sheet-resistance, temperature coefficient and piezoresistance / gauge factor) and stability of thick-film resistors with low firing temperatures (525...650°C) are studied. To this end, two low-melting lead borosilicate glass c ...

2006

High-Voltage Sensitivity Studies of Model Thick-Film Resistors

Peter Ryser, Claudio Grimaldi, Thomas Maeder, Caroline Jacq, Niklaus Johner, Adrian Kambli

In this work we seek to better understand the mechanisms governing pulse voltage trimming in disordered conductor-insulator composites. Therefore, we investigate the effect of the composition of thick-film resistors (TFRs) on sensitivity to high voltage pu ...

2006

Structuration and Fabrication of Sensors Based on LTCC (Low Temperature Co-fired Ceramic) Technology

Peter Ryser, Thomas Maeder, Caroline Jacq, Hansu Birol, Giancarlo Corradini

The purpose of this paper is to demonstrate sensors and structures fabricated using the LTCC technology, which has been addressed and employed increasingly as a smart packaging approach for several applications. The focus will be on inclination and cantile ...

Trans Tech Publications2006

Fabrication of low-temperature co-fired ceramics micro-fluidic devices using sacrificial carbon layers

Peter Ryser, Thomas Maeder, Caroline Jacq, Hansu Birol, Sigfrid Straessler

Ease of fabrication and design flexibility are two attractive features of low temperature co-fired ceramics (LTCC) technology for fabrication of complex micro-fluidic devices. Such structures are designed and processed using different shaping methods, the ...

2005

Page 2 sur 3

Properties and stability of thick-film resistors with low processing temperatures - effect of composition and processing parameters

Claudio Grimaldi, Thomas Maeder, Caroline Jacq, Sonia Vionnet Menot

2006

Subsolidus phase equilibria in the PbO-poor part of the TiO2–PbO–SiO2 system and its application in low-temperature thick-film dielectrics

Thomas Maeder, Caroline Jacq, Marko Hrovat

2006