Publications de Ricardo Lima | EPFL Graph Search

Modification of the Alfven wave spectrum by pellet injection

Olivier Sauter, Ambrogio Fasoli, Yiming Li, Basil Duval, Jonathan Graves, Duccio Testa, Patrick Blanchard, Henri Weisen, Alessandro Pau, Federico Nespoli

Alfven eigenmodes driven by energetic particles are routinely observed in tokamak plasmas. These modes consist of poloidal harmonics of shear Alfven waves coupled by inhomogeneity in the magnetic field. Further coupling is introduced by 3D inhomogeneities ...

IOP Publishing Ltd2019

COREDIV numerical simulation of high neutron rate JET-ILW DD pulses in view of extension to JET-ILW DT experiments

Olivier Sauter, Ambrogio Fasoli, Yiming Li, Basil Duval, Martinus Gijs, Duccio Testa, Jonathan Graves, Patrick Blanchard, Federico Alberto Alfredo Felici, Bruno Emanuel Ferreira De Sousa Correia

Two high performance JET-ILW pulses, pertaining to the 2016 experimental campaign, have been numerically simulated with the self-consistent code COREDIV with the aim of predicting the ELM-averaged power load to the target when extrapolated to DT plasmas. T ...

IOP Publishing Ltd2019

Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall

Olivier Sauter, Ambrogio Fasoli, Yiming Li, Basil Duval, Martinus Gijs, Duccio Testa, Jonathan Graves, Patrick Blanchard, Federico Alberto Alfredo Felici, Alessandro Pau

For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures si ...

IOP Publishing Ltd2019

Two-phase frictional pressure drops in U-bends and contiguous straight tubes for different refrigerants, orientations, tube, and bend diameters: Part 1. Experimental results (RP-1444)

John Richard Thome, Ricardo Lima

Over the years, much research has been conducted on two-phase flows in straight tubes because these tend, in length, to be predominant in two-phase systems. However, two-phase heat exchangers can also have singularity elements, where the most common type i ...

Taylor & Francis Inc2012

Two-phase flow patterns in U-bends and their contiguous straight tubes for different orientations, tube and bend diameters

John Richard Thome, Ricardo Lima

In two-phase systems there are many singularities in piping systems, one of which in particular are U-bends (also called 180 degrees return bends or U-tubes) found very often in air conditioning coils, refrigerant systems, etc. Contrary to the literature c ...

Elsevier2012

Two-phase frictional pressure drops in U-bends and contiguous straight tubes for different refrigerants, orientations, tube, and bend diameters: Part 2. New models (RP-1444)

John Richard Thome, Ricardo Lima

In the first part of this article (Silva Lima and Thome 2012b), new experimental frictional pressure drop data in U-bends were presented and discussed. The experimental data were obtained for R410A and R134a at two saturation temperatures (5 degrees C and ...

Taylor & Francis Inc2012

Experimental and Visual Study on Flow Patterns and Pressure Drops in U-Tubes

Ricardo Lima

In single- and two-phase flow heat exchangers (in particular "coils"), besides the straight tubes there are also many singularities, in particular the 180° return bends (also called return bends or U-bends). However, contrary to the literature concerning p ...

EPFL2011

TWO-PHASE FLOW AND BOILING OF AMMONIA IN HORIZONTAL SMOOTH TUBES

John Richard Thome, Ricardo Lima

The lecture will address our experimental work on observing flow patterns and measuring heat transfer coefficients and two-phase pressure drops for evaporating ammonia flows in a horizontal tube over a range of mass fluxes and saturation temperatures. Some ...

2011

Two-Phase Pressure Drops in Adiabatic Horizontal Circular Smooth U-Bends and Contiguous Straight Pipes (RP-1444)

John Richard Thome, Ricardo Lima

Curved channels in the form of bends are encountered in many industrial two-phase flow applications, such as U-bends in air-conditioning and refrigeration evaporators and condensers. For engineering design purposes, the evaluation of the pressure loss in t ...

2010

Flow boiling in horizontal flattened tubes: Part I – Two-phase frictional pressure drop results and model

John Richard Thome, Jesus Moreno Quiben, Ricardo Lima

Experiments of diabatic two-phase pressure drops in flow boiling were conducted in four horizontal flattened smooth copper tubes with two different heights of 2 and 3 mm. The equivalent diameters of the flat tubes are 8.6, 7.17. 6.25, and 5.3 mm. The worki ...

2009