Publications de Larissa Sorensen

Towards aerospace grade thin-ply composites: Effect of ply thickness, fibre, matrix and interlayer toughening on strength and damage tolerance

John Botsis, Robin Amacher, Joël Cugnoni, Larissa Sorensen, Sébastien Kohler

Thin-ply composites represent a promising approach to further improve the performance of carbon fibre composite structures thanks to their ability to delay the onset of matrix cracking and delamination up to the point of fibre dominated failure. However, t ...

ELSEVIER SCI LTD2018

Thin ply composites: Experimental characterization and modeling of size-effects

John Botsis, Joël Cugnoni, Robin Amacher, Larissa Sorensen

Thin-ply composites are rapidly gaining interest in the composite industry, not only because of the larger design possibilities that they offer, but also because of positive size effects that have been shown to improve performance in various loading condit ...

Elsevier2014

Bridging tractions in mode-I delamination: measurements and simulations

John Botsis, Thomas Gmür, Laurent Humbert, Larissa Sorensen

2008

Characterisation of bridging tractions in mode-I delamination using distributed strain measurements and numerical modelling

John Botsis, Thomas Gmür, Joël Cugnoni, Larissa Sorensen

2008

Delamination detection and determination of bridging stresses using FBG optical sensors

John Botsis, Thomas Gmür, Larissa Sorensen

2007

Bridging tractions in mode-I delamination: measurements and simulations

John Botsis, Thomas Gmür, Laurent Humbert, Larissa Sorensen

Sheffield University Press2007

Measurements of temperature during fatigue of a thermoplastic polymer composite using FBG sensors

John Botsis, Larissa Sorensen

2007

The response of embedded FBG sensors to non-uniform strains in CFRP composites during processing and delamination

Larissa Sorensen

From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...

EPFL2007

Investigation of residual strains and delamination in AS4/PPS composite using fibre Bragg grating sensors

John Botsis, Thomas Gmür, Larissa Sorensen

2006

Delamination propagation measurement using long gauge-length FBG sensors

John Botsis, Thomas Gmür, Larissa Sorensen

2006