Publications de Pietro Tanasini

Electrochemical model of solid oxide fuel cell for simulation at the stack scale. Part II: Implementation of degradation processes

Daniel Favrat, Jan Van Herle, Stefan Diethelm, Arata Nakajo, Pietro Tanasini

The degradation of the electrochemical performance of solid oxide fuel cell (SOFC) devices is a major hurdle to overcome before commercialisation. The interplay between the phenomena and the long testing times complicate the research, which highlights the ...

2011

Segmented cell testing for cathode parameter investigation

Christos Comninellis, Jan Van Herle, Josef Andreas Schuler, Zacharie Wuillemin, Pietro Tanasini

The increasing quality and durability of solid oxide fuel cells (SOFCs) state-of-the-art materials renders the long-term testing of fuel cells difficult since considerably long equipment times are needed to obtain valuable results. Moreover, reproducibilit ...

Elsevier2011

Analysis of Solid Oxide Fuel Cell LSM-YSZ Composite Cathodes With Varying Starting Powder Sizes

Christos Comninellis, Jan Van Herle, Pietro Tanasini

Solid oxide fuel cell cathodes have been examined using non-destructive x-ray nanotomography. The cathodes examined were a composite of strontium-doped lanthanum manganite (LSM) and yttria-stabilized zirconia (YSZ), with three different starting powder siz ...

2011

Comparison of SOFC cathode microstructure quantified using X-ray nanotomography and focused ion beam scanning electron microscopy

Christos Comninellis, Jan Van Herle, Marco Cantoni, Pietro Tanasini

X-ray nanotomography and focused ion beans scanning electron microscopy (FIB-SEM) have been applied to investigate the complex 3D microstructure of solid oxide fuel cell (SOFC) electrodes at spatial resolutions of 45 nm and below. The application of near e ...

Elsevier2011

Comparison of X-ray Nanotomography and FIB-SEM in Quantifying the Composite LSM/YSZ SOFC Cathode Microstructure

Christos Comninellis, Jan Van Herle, Marco Cantoni, Pietro Tanasini

X-ray nanotomography and focused ion beam scanning electron microscopy (FIB-SEM) provide unique opportunities to interrogate the 3D microstructure of solid oxide fuel cell (SOFC) electrodes with unprecedented spatial resolution with elemental specificity. ...

2011

Design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid oxide fuel cell. Part II: Electrical, electrochemical and microstructural characterization of tape-cast cells

Jan Van Herle, Aïcha Hessler-Wyser, Marco Cantoni, Stefan Diethelm, Antonin Faes, Zacharie Wuillemin, Pietro Tanasini, Henning Lübbe, Nicola Accardo

One of the major limitations of the nickel (Ni) - yttria-stabilized zirconia (YSZ) anode support for solid oxide fuel cells (SOFC) is its low capability to withstand transients between reducing and oxidizing atmospheres ("RedOx" cycle), owing to the Ni-to- ...

Elsevier2011

Redox stable Ni–YSZ anode support in solid oxide fuel cell stack configuration

Jan Van Herle, Antonin Faes, Zacharie Wuillemin, Pietro Tanasini, Nicola Accardo

State-of-the-art nickel-based SOFC anode-supported cells are highly sensitive to reoxidation of the metal phase at the temperature of utilization. This work presents results on redox stable nickel–YSZ (yttria- stabilized zirconia) anode-supported cells, fo ...

Elsevier2011

Modelling-Assisted Investigation of Degradation Phenomena in LSM-based SOFC Composite Cathodes

Pietro Tanasini

This thesis focuses on the degradation pathways occurring in composite solid oxide fuel cell (SOFC) cathodes based on lanthanum-strontium manganite (LSM), combining modeling at the electrode level with experimental data. LSM composite electrodes are one of ...

EPFL2011

Cathode thickness-dependent tolerance to Cr-poisoning in solid oxide fuel cells

Christos Comninellis, Jan Van Herle, Aïcha Hessler-Wyser, Josef Andreas Schuler, Pietro Tanasini

This work aimed to set new guidelines for the quantification of Cr accumulation in solid oxide fuel cell cathodes after operation, and enabled to pinpoint a diffusion-controlled tolerance to Cr-poisoning for increased cathode thickness; the additional cath ...

Elsevier2010

Rapid chromium quantification in solid oxide fuel cell cathodes

Jan Van Herle, Aïcha Hessler-Wyser, Josef Andreas Schuler, Pietro Tanasini

The detection and quantification of small quantities of Cr in (La,Sr)MnO3/Y–ZrO2 solid oxide fuel cell (SOFC) cathodes by energy-dispersive X-ray spectroscopy (EDXS) is not straightforward as Cr X-ray emission lines overlap with La/Mn and O lines. This wor ...

Elsevier2010