Aurelio MuttoniAurelio Muttoni est professeur ordinaire et directeur du Laboratoire de Construction en Béton de l’Ecole Polytechnique Fédérale de Lausanne (Suisse). Il a reçu son diplôme et son doctorat en génie civil de l’Ecole Polytechnique Fédérale de Zürich à Zürich, Suisse, en 1982 et 1989 respectivement.
Ses activités actuelles en matière d’enseignement se concentrent sur la conception des structures, la théorie et le dimensionnement des structures en béton ainsi que la conception des ponts. Son groupe de recherche est actif dans les domaines suivants : comportement et méthodes de dimensionnement des structures en béton, conception de structures innovantes, effort tranchant dans les structures en béton, poinçonnement des dalles, analyse non-linéaire des structures incluant leur fiabilité, adhérence entre l’acier et le béton, engrènement des granulats, fatigue et influence de la durée de chargement sur la résistance du béton, comportement mécanique et principes de dimensionnement pour le béton à ultra-hautes performances, béton textile et béton recyclé.
Aurelio Muttoni a reçu la distinction
Chester Paul Siess Award for Excellence in Structural Research
en 2010 et la médaille
Wason for Most Meritorious Paper
en 2014, toutes deux décernées par l’
American Concrete Institute
. Il est membre du Presidium de la
fib
(Fédération Internationale du Béton), de plusieurs commissions et groupes de travail de la
fib
et il a dirigé le
Project Team
pour la deuxième génération de la norme européenne EN 1992-1-1 (Eurocode pour les structures en béton).
Aurelio Muttoni est aussi co-fondateur et associé du bureau de conseil Muttoni & Fernández (www.mfic.ch). Ce bureau est actif dans la conception, l’analyse et le dimensionnement de structures porteuses pour les constructions d’architecture et de génie civil, ainsi que dans le conseil en matière d’ingénierie structurale. Thomas KellerEDUCATION
1992 Dr. sc. techn. (PhD)
Swiss Federal Institute of Technology, Zurich (ETH)
1983 Dipl. Bauing. ETH (MS civil engineering)
Swiss Federal Institute of Technology, Zurich (ETH)
EMPLOYMENT
2007-present, Full Professor of Structural Engineering (100%)
Swiss Federal Institute of Technology, Lausanne (EPFL)
Civil Engineering Institute
1998-2007, Associate Professor of Structural Engineering (80/100%)
Swiss Federal Institute of Technology, Lausanne (EPFL)
Structural Engineering Institute
Foundation of CCLab in 2000
1996-1998, Assistant Professor of Structural Engineering (50%)
Swiss Federal Institute of Technology, Zurich (ETH)
Department of Architecture
1992-2004, Senior Project Engineer and Joint Owner
Engineering offices in Zug and Zurich
1990-1992, Research Scientist
Swiss Federal Institute of Technology, Zurich (ETH)
Structural Engineering Institute
1986-1990, Project Engineer
Architecture and engineering office Calatrava, Zurich
1983-1986, Teaching and Research Assistant
Swiss Federal Institute of Technology, Zurich (ETH)
Structural Engineering Institute
Katrin BeyerSince 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory
2010-2017 Assistant Professor, EPFL.
2008-2010 Post-doctoral researcher, ETH Zürich.
2003-2007 Ph.D., Roseschool / Università di Pavia, Italy.
2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London.
2001 Diploma, Civil engineering, ETH Zürich.
Eugen Brühwilerbirth date: 19.11.1958 nationality: Swiss (native from Dussnang, Canton of Thurgau) Education : - July 1988 : doctoral degree from the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland with a thesis entitled Fracture mechanics of dam concrete subjected to quasi-static and seismic loading conditions - December 1983 : civil engineering diploma (university degree) from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland Professional Experience : - Since 1st April 1995 : Professor of Structural Engineering at EPFL and Head of the Laboratory of Maintenance, Construction and Safety for Civil Structures (MCS) (often considered being the first chair worldwide devoted exclusively to existing civil structures). - 1991-94 Project Manager and structural engineer with the Swiss Federal Railways (SBB), Division of Bridges and Structures, Zurich: Monitoring and maintenance of bridges and structures, Project manager and checking engineer for the construction of new bridges and rehabilitation of existing bridges. - 1989/90 Research associate at the Department of Civil Engineering, University of Colorado, Boulder, USA : Fracture mechanics of concrete and fracture of concrete dams. - 1986-88 Doctoral student at EPFL-LMC (Building Materials, Prof. Wittmann) : Fracture mechanics of concrete, fracture of concrete dams under seismic loading - 1984/85 Research engineer at EPFL-ICOM (Steel Structures, Prof. Badoux and Prof. Hirt) : Fatigue behaviour and fracture mechanics of riveted bridges
Lyesse LalouiDirector, EPFL Soil Mechanics LaboratoryDirector, EPFL Civil Engineering SectionEditor in Chief, ElsevierMember of the Swiss Academy of Engineering SciencesFounding Partner, Geoeg & MeduSoilActive in academic research in the following institutions: Lausanne, EPFL, Durham, Duke University, Nanjing, Hohai UniversityProfessor Lyesse Laloui teaches at EPFL, where he directs the Soil Mechanics Laboratory as well as the Civil Engineering Section. He is a founding partner of the international engineering company Geoeg, and the start-up MeduSoil. In addition, he is an adjunct professor at Duke University, USA and an advisory professor at Hohai University, China as well as honorary director of the International Joint Research Center for Energy Geotechnics in China.He is the recipient of an Advance ERC grant for his BIO-mediated GEO-material Strengthening project. Editor in Chief of the Elsevier Geomechanics for Energy and the Environment journal, he is a leading scientist in the field of geomechanics and geo-energy. He has written and edited 13 books and published over 320 peer reviewed papers; his work is cited more than 6000 times with an h-index of 39 (Scopus). Two of his papers are among the top 1% in the academic field of Engineering. He has given keynote and invited lectures at more than 40 leading international conferences. He has received several international awards (IACMAG, RM Quigley, Roberval) and delivered honorary lectures (Vardoulakis, Minnesota; G.A. Leonards, Purdue; Kersten, Minnesota). He recently acted as the Chair of the international evaluation panel of Civil and Geological Engineering R&D Units of Portugal.Nov. 2019 For further information visit www.epfl.ch/labs/lms/ ; geoeg.net ; medusoil.com Anastasios VassilopoulosPERSONAL INFORMATION Name : Anastasios P. Vassilopoulos email : [email protected] Tel: 41 21 6936393 Fax: 41 21 6936240 SUMMARY OF QUALIFICATIONS 1995: Dipl. Mechanical Engineer, University of Patras, Greece 2001: Dr Mechanical Engineer, Doctoral thesis in fatigue of composite materials from the Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece CURRENT POSITION Senior Scientist (MER), Composite Construction Laboaratory (CCLab), EPFL PREVIOUS POSITIONS 2006-2012 Research and Teaching Associate, Composite Construction Laboaratory (CCLab), EPFL 2002-2006 Assisstant Professor, Technological Educational Institute (TEI) of Patras, Greece 2001-2003 Post-doctoral Research associate, (Part-time) Dept. Mechanical Engineering and Aeronautics of the University of Patras, Greece. EDUCATION 1990 - 1995 Graduate student, Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece October 1994-January 1995 Dept. Mechanical Engineering, University of Bristol, U.K. (In the frame of Erasmus project for the final year thesis, under the supervision of Prof. R. D. Adams) 1995 - 2000 Research assistant, Dept. Mechanical Engineering and Aeronautics, University of Patras. LANGUAGES English, Greek, French COMMUNITY ACTIVITIES (Member of) Council of the European Society of Composite Materials (ESCM) Council of the European Society of Experimental Mechanics (EuraSEM) The European Structural Integrity Society (ESIS) The European Energy Research Alliance (EERA, JP WIND) The Technical Chamber of Greece (TCG) The Hellenic Association of Mechanical & Electrical Engineers SCIENTIFIC-RESEARCH INTERESTS Experimental methods for the study of the behavior of composite materials under static and fatigue loading Development of analytical methods for the study of the behavior of FRP composite materials under variable amplitude complex stress states Development of fatigue life prediction methodologies for composite materials and structures Design of constructions with composite materials Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. 