Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Aluminium (Al 99.99 % purity) and aluminium alloy Al-5.7Ni and Al-5Mg (wt.%) open-cell foams made by replication processing are creep-tested in the temperature range T/Tm=0.5-0.8, varying the relative density between 0.10 and 0.25. Steady state creep rates ...
Open-pore replicated microcellular 99.99% pure aluminium is tested in tensile creep, varying the temperature from 150 to 450 degrees C, the applied stress from 0.15 to 0.5 MPa, and the relative density from 0.14 to 0.28. Tensile creep curves are of classic ...
Elsevier2011
, ,
The cyclic behaviour of 400 mu m pore size replicated aluminium foam is assessed in tension-tension fatigue with a stress ratio equal to 0.1, keeping the load amplitude constant, for relative density values comprised between 0.175 and 0.220. The number of ...
Elsevier2011
, , , , , ,
Microcellular aluminium can be produced by a process known as replication; this involves the infiltration of a packed bed of NaCl particles which are subsequently leached after metal solidification. The resulting material features a uniform distribution of ...
We consider a material having a constant true activation volume and estimate the apparent activation volume that it displays in cyclic creep or ratcheting. We show that cyclic stresses have an effect on the measured value, and that this can be accounted fo ...
