EPFL Logo
fr|en
Se Connecter
Personne

François Henri Avet

Cette personne n’est plus à l’EPFL

Publications associées (19)

Report of RILEM TC 267-TRM phase 3: validation of the R-3 reactivity test across a wide range of materials

Karen Scrivener, Alastair Thomas Matthew Marsh, Ruben Anton Snellings, Mohsen Ben Haha, François Henri Avet, Xuerun Li, Pawel Tadeusz Durdzinski, Diana Londoño Zuluaga

RILEM TC 267 TRM- "Tests for Reactivity of Supplementary Cementitious Materials" recommends the Rapid Reliable Relevant (R-3) test as a method for determining the chemical reactivity of supplementary cementitious materials (SCMs) in Portland cement blends. ...
SPRINGER2022

Clay calcination technology: state-of-the-art review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Alastair Thomas Matthew Marsh, Mohsen Ben Haha, François Henri Avet, Shashank Bishnoi, Adrian Alujas Diaz, Anuj Parashar

The use of calcined clays as supplementary cementitious materials provides the opportunity to significantly reduce the cement industry's carbon burden; however, use at a global scale requires a deep understanding of the extraction and processing of the cla ...
SPRINGER2022

Report of RILEM TC 267-TRM phase 2: optimization and testing of the robustness of the R3 reactivity tests for supplementary cementitious materials

Karen Scrivener, Alastair Thomas Matthew Marsh, Ruben Anton Snellings, Mohsen Ben Haha, François Henri Avet, Shashank Bishnoi, Xuerun Li, Pawel Tadeusz Durdzinski, Diana Londoño Zuluaga, Anuj Parashar

The results of phase 1 of an interlaboratory test, coordinated by the RILEM TC 267-TRM "Tests for Reactivity of Supplementary Cementitious Materials" showed that the R-3 (rapid, relevant, reliable) test method, by measurement of heat release or bound water ...
SPRINGER2022

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet, Anuj Parashar, Yuvaraj Dhandapani, Sreejith Krishnan

The RILEM technical committee 282-CCL: Calcined Clays as Supplementary Cementitious Materials, investigates all the aspects related to calcined clays, from clay exploration and characterization to calcination process, hydration reactions and concrete prope ...
SPRINGER2022

Strength-promoting mechanism of alkanolamines on limestone-calcined clay cement and the role of sulfate

Karen Scrivener, François Henri Avet, Xuerun Li, Wilasinee Hanpongpun, Hong Huang

This paper reports the strength-promoting mechanism of alkanolamines on limestone-calcined clay cement (LC3). The hydration kinetics, phase formation and microstructure of LC3 with triethanolamine (TEA) or triisopropanolamine (TIPA) were investigated. TEA ...
PERGAMON-ELSEVIER SCIENCE LTD2021

Understanding of the factors slowing down metakaolin reaction in limestone calcined clay cement (LC3) at late ages

Karen Scrivener, Paul Bowen, Yosra Briki, Mohsen Ben Haha, François Henri Avet

Factors which could explain the slowing down of the metakaolin reaction in LC3 blends are investigated. Portlandite availability and the presence of aluminium ions in the pore solution are shown not to be limiting factors. Hydrates can only precipitate in ...
PERGAMON-ELSEVIER SCIENCE LTD2021

The Influence of some calcined clays from Nigeria as clinker substitute in cementitious systems

Karen Scrivener, François Henri Avet, Akindehinde Ayotunde Akindahunsi

This paper examines the possibility of the use of some clays calcined from Nigeria as partial substitutes for clinker in the production of Limestone Calcined Clay Cement (LC3). The clays were calcined in the oven at a temperature of 800 degrees C and for o ...
ELSEVIER2020

Effect of temperature on the water content of C-A-S-H in plain Portland and blended cements

Karen Scrivener, François Henri Avet

This study aims to investigate the change with temperature of the water content of the C-(A)-S-H of plain cement (PC) and Limestone Calcined Clay Cement (LC3). The water content was determined by various methods: thermogravimetric analysis (TGA), H-1-nucle ...
PERGAMON-ELSEVIER SCIENCE LTD2020

Influence of pH on the chloride binding capacity of Limestone Calcined Clay Cements (LC3)

Karen Scrivener, François Henri Avet

The high solution to solid ratio normally used for the measurement of chloride binding isotherms, leads to a leaching of ions and a decrease of pH. To make binding test more representative of on-site conditions, we investigated the influence of the increas ...
PERGAMON-ELSEVIER SCIENCE LTD2020

Impacting factors and properties of limestone calcined clay cements (LC3)

Karen Scrivener, Franco Alberto Zunino Sommariva, François Henri Avet, Julien Ston, Aurélie Rosine Favier, Hamed Maraghechi, Wilasinee Hanpongpun

This paper details the main factors influencing the performance of limestone calcined clay cements (LC3). The kaolinite content plays a major role in the rheological properties as well as strength development. Even in the presence of secondary phases, kaol ...
ICE PUBLISHING2019

Copyright © 2025 EPFL, tous droits réservés

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.