Publications de Bo Jiang | EPFL Graph Search

Design and packaging of a highly integrated microreactor system for high-temperature on-board hydrogen production

John Richard Thome, Paul Muralt, Thomas Maeder, Navid Borhani, Bo Jiang, Dimos Poulikakos

Highlights • A “plug-and-play” microreaction system for high-temperature reactions (>500 °C). • Efficient thermal decoupling for using standard electrical/fluidic connections. • Automatic and accurate temperature control for calorimetric measurements. • A ...

Elsevier2015

Meso-scale ceramic hotplates - A playground for high temperature microsystems

Paul Muralt, Thomas Maeder, Bo Jiang

This paper presents a mesa-scale low-temperature co-fired ceramic (LTCC) hotplate system. Using embedded thick-film platinum heaters, the hotplate has been able to operate at about 600 degrees C in a reliable manner, while its operating temperature can be ...

Elsevier2015

A low-temperature co-fired ceramic micro-reactor system for high-efficiency on-site hydrogen production

Paul Muralt, Thomas Maeder, Bo Jiang, Dimos Poulikakos

A ceramic-based, meso-scale fuel processor for on-board production of syngas fuel was demonstrated for applications in micro-scale solid-oxide fuel cells (mu-SOFCs). The processor had a total dimension of 12 mm x 40 mm x 2 mm, the gas reforming micro react ...

Elsevier2015

Fine structuration of low-temperature co-fired ceramic (LTCC) microreactors

Paul Muralt, Albert Renken, Bo Jiang, Lioubov Kiwi, Thomas Maeder, Julien Haber

The development of microreactors that operate under harsh conditions is always of great interest for many applications. Here we present a microfabrication process based on low-temperature co-fired ceramic (LTCC) technology for producing microreactors which ...

Royal Society of Chemistry2015

Ceramics based technologies for high-temperature micro-reactors

Bo Jiang

EPFL2014

A thermally self-sustained micro-power plant with integrated micro-solid oxide fuel cells, micro-reformer and functional micro-fluidic carrier

Paul Muralt, Thomas Maeder, Claude Muller, Bo Jiang, Alex Dommann, Dimos Poulikakos

Low temperature micro-solid oxide fuel cell (micro-SOFC) systems are an attractive alternative power source for small-size portable electronic devices due to their high energy efficiency and density. Here, we report a thermally self-sustainable reformer – ...

Elsevier2014

Multi-injection microstructured reactor for intensification of fast exothermic reactions: proof of concept

Albert Renken, Lioubov Kiwi, Thomas Maeder, Bo Jiang, Julien Haber

Quasi-instantaneous exothermic reactions lead to the formation of unwanted hot spots even when carried out in conventional microstructured reactors (MSR) with tube diameter of 100 − 1000 μm. For this reason, alternative MSR designs are warranted to enable ...

Walter de Gruyter2013

Syngas generation from n-butane with an integrated MEMS assembly for gas processing in micro-solid oxide fuel cell systems

Paul Muralt, Thomas Maeder, Bo Jiang, Dimos Poulikakos

An integrated system of a microreformer and a carrier allowing for syngas generation from liquefied petroleum gas (LPG) for micro-SOFC application is discussed. The microreformer with an overall size of 12.7 mm × 12.7 mm × 1.9 mm is fabricated with micro-e ...

Royal Soc Chemistry2012

A micro heater platform with fluid channels for testing micro-solid oxide fuel cell components

Paul Muralt, Thomas Maeder, Bo Jiang, Dimos Poulikakos

Micro-scale solid oxide fuel cell is a promising power generation technology for portable devices such as laptop, medical devices and personal electronics. One of the key goals in design of μ-SOFC systems is to use common hydrocarbon fuels such as propane/ ...

Elsevier2012

Defects in Two Dimensional Crystals: An Ultra-high Resolution Aberration-corrected Electron Microscopy Study

Oleg Yazyev, Bo Jiang, Rolf Erni

Cambridge, Cambridge University Press2012