Publications de Davide Uglietti

DC and quench performance assessment from the EUROfusion HTS Quench Experiment campaign and projection to magnet operation

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Nikolay Bykovskiy

Seven different high current conductors for fusion applications, made of High Temperature Superconducting stacked tapes, have been successfully tested in the Quench Experiment campaign supported by EUROfusion and carried out in SULTAN. The aim of this exte ...

2025

A compact frozen-spin trap for the search for the electric dipole moment of the muon

Davide Uglietti

Electric dipole moments (EDM) of fundamental particles inherently violate time-reversal (T) and the combined charge-conjugation and parity symmetry (CP). We aim to measure the EDM of the muon using the frozen-spin technique within a compact storage trap. T ...

Springer Science and Business Media LLC2025

Thermal-hydraulic analysis of the CORCⓇ conductor for the DEMO CS coil

Davide Uglietti

Conductors using High Temperature Superconductor (HTS) tapes are considered as a very promising solution for future high-field fusion magnets. Various HTS cable concepts, such as e.g. twisted stack cable, cross-conductor (CroCo), Roebel assembled coated co ...

2025

Quench Detection and Temperature Measurement With Fiber Optic Sensors

Kamil Sedlák, Davide Uglietti, Christoph Müller

For the EU DEMO conductor testing, a temperature sensor based on Fiber Bragg Grating (FBG) optical fiber is studied at the EPFL Swiss Plasma Center. The SULTAN test facility has been upgraded to use fiber optic sensor for temperature monitoring and quench ...

IEEE Institute of Electrical and Electronics Engineers2024

Examination of commercial ceramic coatings for the electrical insulation of Bi-2212 wire

Davide Uglietti, Andrea Testino, Robert Sobota

In the last twenty years, a number of studies have been dedicated to the development of thin ceramic coating for the electrical insulation of Ag-sheathed Bi-2212 wires. Instead of preparing a coating by mixing different compounds in house, this technical n ...

2023

Impact of Hysteresis Losses in Hybrid (HTS-LTS) Coils for Fusion Applications

Davide Uglietti

Several conductor designs featuring High Temperature Superconducting (HTS) stacked tapes for fusion coils are being proposed. These conductors are planned to operate in time-varying magnetic field and current; thus, the estimation of AC losses is fundament ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

The DEMO magnet system - Status and future challenges

Pierluigi Bruzzone, Rainer Wesche, Kamil Sedlák, Davide Uglietti, Federica Demattè, Roberto Guarino, Mithlesh Kumar, Vincenzo D'Auria, Ortensia Dicuonzo, Chiara Frittitta

We present the pre-concept design of the European DEMO Magnet System, which has successfully passed the DEMO plant-level gate review in 2020. The main design input parameters originate from the so-called DEMO 2018 baseline, which was produced using the PRO ...

2022

Co-Wound Superconducting Wire for Quench Detection in Fusion Magnets

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Nikolay Bykovskiy

High temperature superconducting (HTS) materials are widely utilized in various design proposals for fusion magnets, resulting in enhanced performance of the machines compared to the past. However, a reliable quench detection in HTS conductors remains an o ...

IEEE Institute of Electrical and Electronics Engineers2022

Upgrade and Commissioning of the SULTAN Facility to Host Quench Experiments on HTS High Current Conductors

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov, Rainer Wesche, Ortensia Dicuonzo

High Temperature Superconductors (HTS) are promising materials for future fusion magnets. One of HTS conductors' main issues is the quench protection: the quench develops much slower than in LTS, delaying the quench detection by voltage monitoring and caus ...

IEEE Institute of Electrical and Electronics Engineers2021

Non-twisted stacks of coated conductors for magnets: Analysis of inductance and AC losses

Davide Uglietti, Francesco Grilli, Rainer Wesche

Almost all present High Temperature Superconducting (HTS) cable designs for magnets are based on twisted or transposed concepts that were developed for Low Temperature Superconducting (LTS) cables. However, requirements for LTS materials (like filament twi ...

2020