Publications de Mojtaba Abdi Jalebi

Minimizing the Trade-Off between Photocurrent and Photovoltage in Triple-Cation Mixed-Halide Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Thomas Paul Baumeler, Mohammad Ibrahim Dar, Neha Arora, Yuhang Liu, Mojtaba Abdi Jalebi, Seckin Akin, Ryusuke Uchida

Its lower bandgap makes formamidinium lead iodide (FAPbI(3)) a more suitable candidate for single-junction solar cells than pure methylammonium lead iodide (MAPbI(3)). However, its structural and thermodynamic stability is improved by introducing a signifi ...

2020

Charge extraction via graded doping of hole transport layers gives highly luminescent and stable metal halide perovskite devices

Michael Graetzel, Mohammad Ibrahim Dar, Mojtaba Abdi Jalebi, Zahra Andaji Garmaroudi

One source of instability in perovskite solar cells (PSCs) is interfacial defects, particularly those that exist between the perovskite and the hole transport layer (HTL). We demonstrate that thermally evaporated dopant-free tetra-cene (120 nm) on top of t ...

2019

Dedoping of Lead Halide Perovskites Incorporating Monovalent Cations

Mohammad Ibrahim Dar, Mojtaba Abdi Jalebi

2018

Monovalent Cation Doping of CH3NH3PbI3 for Efficient Perovskite Solar Cells

Michael Graetzel, Mojtaba Abdi Jalebi, Mohammad Ibrahim Dar

Here, we demonstrate the incorporation of monovalent cation additives into CH3NH3PbI3 perovskite in order to adjust the optical, excitonic, and electrical properties. The possibility of doping was investigated by adding monovalent cation halides with simil ...

Journal Of Visualized Experiments2017

Intrinsic and Extrinsic Stability of Formamidinium Lead Bromide Perovskite Solar Cells Yielding High Photovoltage

Shaik Mohammed Zakeeruddin, Mohammad Ibrahim Dar, Fabrizio Giordano, Gwénolé Jean Jacopin, Neha Arora, Norman Pellet, Mojtaba Abdi Jalebi

We report on both the intrinsic and the extrinsic stability of a formamidinium lead bromide [CH(NH2)(2)PbBr3 = FAPbBr(3)] perovskite solar cell that yields a high photovoltage. The fabrication of FAPbBr(3) devices, displaying an outstanding photo voltage o ...

American Chemical Society2016

Critical light instability in CB/DIO processed PBDTTT-EFT:PC71BM organic photovoltaic devices

Konrad Domanski, Mojtaba Abdi Jalebi

Organic photovoltaic (OPV) devices often undergo 'burn-in' during the early stages of operation, this period describing the relatively rapid drop in power output before stabilising. For normal and inverted PBDTTT-EFT:PC71BM OPVs prepared according to curre ...

Elsevier2016

Growth Engineering of CH3NH3PbI3 Structures for High-Efficiency Solar Cells

Michael Graetzel, Mohammad Khaja Nazeeruddin, Mohammad Ibrahim Dar, Neha Arora, Mojtaba Abdi Jalebi

Controlling the growth of perovskite crystals has been one of the interesting strategies to mold their fundamental properties and exploit their potential in the fabrication of high performance solar cells. Herein, the impact of chloride on the conversion o ...

Wiley-VCH Verlag Berlin2016

Impact of a Mesoporous Titania-Perovskite Interface on the Performance of Hybrid Organic-Inorganic Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Mohammad Ibrahim Dar, Mojtaba Abdi Jalebi, Fabrizio Giordano

We report on the optimization of the interfacial properties of titania in mesoscopic CH3NH3PbI3 solar cells. Modification of the mesoporous TiO2 film by TiCl4 treatment substantially reduced the surface traps, as is evident from the sharpness of the absorp ...

Amer Chemical Soc2016

Understanding the Impact of Bromide on the Photovoltaic Performance of CH3NH3PbI3 Solar Cells

Michael Graetzel, Mohammad Khaja Nazeeruddin, Mohammad Ibrahim Dar, Thomas Moehl, Neha Arora, Mojtaba Abdi Jalebi

An optimum amount of lead bromide (1%) can enhance the power conversion efficiency of CH3NH3PbI3-xBrx (where x approximate to 0) devices from 14.7% to 16.9% without altering the bandgap of the perovskite material. ...

Wiley-V C H Verlag Gmbh2015

Double-Layer TiO2 Electrodes with Controlled Phase Composition and Morphology for Efficient Light Management in Dye-Sensitized Solar Cells

Mojtaba Abdi Jalebi

The light-scattering effect in the dye-sensitized solar cells (DSCs) was studied by controlling TiO2 phase composition and morphology by fabrication of double-layer cells with different arrangement modes. The starting material for preparation of TiO2 cells ...

Springer Verlag2014