Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This experimental study reports effect of tuft geometry i.e., standard tufts and loops milled-down, and tufting pattern on Mode I interlaminar fracture in a GFRP. Standard tufting geometry is responsible for an increase in fracture resistance by 3.5-6 time ...
This article reports modeling techniques and results based on experimental Mode I characterization of a layered woven GFRP material with tufting reinforcement. Standard tuft and loop-less geometries are investigated on three different areal patterns to eva ...
Fiber reinforced composites can develop large scale bridging upon mode I fracture. This toughening mechanism depends on the constituents and the geometry of the specimen, and is especially important in unidirectional laminates when fracture is parallel to ...
Layered fiber reinforced composite materials are prone to fracture in planes parallel to the direction of fibers leading to extensive delamination or intralaminar fracture. This phenomenon of crack propagation is frequently accompanied by significant incre ...
Fracture of carbon fiber reinforced polymers (CFRPs) is dominated by large scale fiber bridging which acts as a very important toughening mechanism. The objective of this paper is to investigate the intralaminar Mode I fracture in a unidirectional CFRP com ...
A detailed experimental-numerical study of large scale bridging during intralaminar fracture of AS4/PPS uniaxial thermoplastic composite is reported. Identification of bridging tractions is carried out using: (a) An inverse identification method based on q ...