Publications de Milica Jovic | EPFL Graph Search

A spatially multiplexed voltammetric magneto-sandwich assay involving Fe3O4/Fe-based metal-organic framework for dual liver cancer biomarkers

Voltammetric sandwich assays were constructed by integrating capture bioreceptors-conjugated magnetic nanocomposites, namely Fe3O4/MIL-101(Fe)-(NH)(CO)-COOH (FO/MOF) and alkaline phosphatase (ALP)labeled detection antibodies on an eight-well screen-printed ...

ELSEVIER SCIENCE SA2023

Rapid Noninvasive Skin Monitoring by Surface Mass Recording and Data Learning

Hubert Girault, Horst Pick, Natalia Gasilova, Andreas Stephan Lesch, Milica Jovic, Yingdi Zhu, Tzu-En Lin

Skin problems are often overlooked due to a lack of robust and patient-friendly monitoring tools. Herein, we report a rapid, noninvasive, and high-throughput analytical chemical methodology, aiming at real-time monitoring of skin conditions and early detec ...

2021

Oxygen Plasma/Bismuth Modified Inkjet Printed Graphene Electrode for the Sensitive Simultaneous Detection of Lead and Cadmium

Hubert Girault, Andreas Stephan Lesch, Milica Jovic, Victor Costa Bassetto, Léopoldine Guenang Sonfack, Prachi Gupta

In this work, a simple procedure for the preparation of an inkjet printed disposable graphene electrode is reported. Commercial graphene ink was printed on a kapton substrate and the resulting electrode was 30 min treated by oxygen plasma, then modified by ...

2020

Inkjet-Printed Carbon Nanotube Electrodes Modified with Dimer-captosuccinic Acid-Capped Fe3O4 Nanoparticles on Reduced Graphene Oxide Nanosheets for Single-Drop Determination of Trifluoperazine

Hubert Girault, Andreas Stephan Lesch, Milica Jovic

Here we report the design of a disposable single-drop voltammetric sensor for the quantitative determination of antipsy-chotic drug trifluoperazine (TFP). The sensor was build using inkjet-printed carbon nanotube (CNT) electrodes which were modified with d ...

2020

Highly Loaded Mildly Edge‐Oxidized Graphene Nanosheet Dispersions for Large‐Scale Inkjet Printing of Electrochemical Sensors

Hubert Girault, Horst Pick, Andreas Stephan Lesch, Milica Jovic, Victor Costa Bassetto, Yingdi Zhu, Bhawna Nagar

Inkjet printing of electrochemical sensors using a highly loaded mildly edge‐oxidized graphene nanosheet (EOGN) ink is presented. An ink with 30 mg/mL EOGNs is formulated in a mixture of N‐methyl pyrrolidone and propylene glycol with only 30 min of sonicat ...

2020

Skin cell analysis

Hubert Girault, Horst Pick, Andreas Stephan Lesch, Milica Jovic, Tzu-En Lin, Yingdi Zhu

The present invention describes an adhesive tape stripping transfer method for quick and non-invasive diagnosis of skin diseases by MALDI-TOF mass spectrometry analysis. Cells from the epidermis layer of a suspicious skin area of a patient are collected us ...

2020

Montmorillonite clay-modified disposable ink-jet-printed graphene electrode as a sensitive voltammetric sensor for the determination of cadmium(II) and lead(II)

Hubert Girault, Andreas Stephan Lesch, Milica Jovic, Victor Costa Bassetto, Léopoldine Guenang Sonfack

This work describes a new sensitive sensor for the simultaneous electrochemical determination by square wave anodic stripping voltammetry of Cd2+ and Pb2+ ions in aqueous solution, based on a disposable ink-jet-printed graphene electrode (IPGE) modifed by ...

2020

Disposable Biosensor Based on Amidase/CeO2/GNR Modified Inkjet‐printed CNT Electrodes‐droplet Based Paracetamol Detection in Biological Fluids for “Point‐of‐care” Applications

Hubert Girault, Andreas Stephan Lesch, Milica Jovic

2019

Point-of-care amperometric determination of L-dopa using an inkjet-printed carbon nanotube electrode modified with dandelion-like MnO2 microspheres

Hubert Girault, Andreas Stephan Lesch, Milica Jovic

An electrochemical sensor is described for the determination of L-dopa (levodopa; 3,4-dihydroxyphenylalanine). An inkjet-printed carbon nanotube (IJPCNT) electrode was modified with manganese dioxide microspheres by drop-casting. They coating was character ...

2019

Inkjet Printed Carbon Nanotube Electrodes for Measuring Pyocyaninand Uric Acid in a Wound Fluid Simulant and Culture Media

Hubert Girault, Andreas Stephan Lesch, Milica Jovic

Polyacrylamide-coated, carbon nanotube (PA/CNT)electrodes were prepared by an ink-jet printing process and used to measure pyocyanin and uric acid in a wound fluid simulant at 37 oC.These two moleculesare potential indicators of infection and therefore the ...

2019