Francesco Maresca | EPFL Graph Search

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Screw vs. edge dislocation strengthening in body-centered-cubic high entrophy alloys and implications for guided alloy design

Carolina Baruffi, William Curtin, Francesco Maresca

Body-centered-cubic (BCC) high entropy alloys (HEAs) can show exceptionally high strength up to high temperatures. Mechanistic theories are needed to guide alloy discovery within the immense multicomponent HEA compositional space. Here, two new theories for strengthening as controlled by screw and edge dislocations, respectively, are applied to predict the yield stresses of a range of BCC alloys over a wide range of temperatures. Results show that the screw theory, with one fitting parameter, can capture experiments in many dilute and non-dilute alloys while the parameter-free edge theory agrees with experiments in non-dilute alloys having a sufficiently large misfit parameter. These results indicate a transition in single-phase alloy strengthening from traditional screw dominance to edge dominance with increasing misfit that is enabled in complex non-dilute alloys. These results point to the use of the edge theory to guide design of high-temperature alloys in the non-dilute range.

SPRINGER HEIDELBERG2022

High energy barriers for edge dislocation motion in body-centered cubic high entropy alloys

William Curtin, Alireza Ghafarollahi, Recep Ekin Kubilay, Francesco Maresca

Recent theory proposes that edge dislocations in random body-centered cubic (BCC) high entropy alloys have high barriers for motion, conveying high strengths up to high temperatures. Here, the energy barriers for edge motion are computed for two model alloys, NbTaV and MoNbTaW as represented by interatomic potentials, using the Nudged Elastic Band method and compared to theoretical predictions. The average magnitude of the barriers and the average spacing of the barriers along the glide direction agree well with the analytical theory, with no adjustable parameters. The evolution of the barriers versus applied stress is modeled, and the mean strength is in reasonable agreement with the predicted zero-temperature strength. These findings validate the analytic theory. A reduced analytic model based on solute misfit volumes is then applied to Hf-Mo-Nb-Ta-Ti-Zr and Mo-Nb-Ta-Ti-V-W alloys, rationalizing the observed significant strength increases at room temperature and 1000 C-circle upon addition of solutes with large misfit into a base alloy. The analytic theory for edge motion is thus a powerful validated tool for guiding alloy selection.

NATURE RESEARCH2021

Strength can be controlled by edge dislocations in refractory high-entropy alloys

William Curtin, Rui Feng, Francesco Maresca

Energy efficiency is motivating the search for new high-temperature (high-T) metals. Some new body-centered-cubic (BCC) random multicomponent "high-entropy alloys (HEAs)" based on refractory elements (Cr-Mo-Nb-Ta-V-W-Hf-Ti-Zr) possess exceptional strengths at high temperatures but the physical origins of this outstanding behavior are not known. Here we show, using integrated in-situ neutron-diffraction (ND), high-resolution transmission electron microscopy (HRTEM), and recent theory, that the high strength and strength retention of a NbTaTiV alloy and a high-strength/low-density CrMoNbV alloy are attributable to edge dislocations. This finding is surprising because plastic flows in BCC elemental metals and dilute alloys are generally controlled by screw dislocations. We use the insight and theory to perform a computationally-guided search over 10(7) BCC HEAs and identify over 10(6) possible ultra-strong high-T alloy compositions for future exploration. The strength in BCC high-entropy alloys is associated with the type of mobile dislocations. Here the authors demonstrate by means of an ample array of experimental techniques that edge dislocations can control the strength of BCC high-entropy alloys.

NATURE PORTFOLIO2021