Bartlomiej Wojciech Sawicki | EPFL Graph Search

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Inverse Analysis of R-UHPFRC Beams to Determine the Flexural Response under Service Loading and at Ultimate Resistance

Eugen Brühwiler, Emmanuel Denarié, Bartlomiej Wojciech Sawicki

Ultra high performance fiber reinforced cementitious composites (UHPFRCs) have demonstrated their outstanding efficiency as structural materials. Determination of the bending resistance of members combining UHPFRC with steel reinforcement bars (R-UHPFRC) using material properties obtained by material testing gives satisfactory results. However, the synergetic interaction between rebar and UHPFRC in the tensile action due to bending, especially under loading–unloading of the structure is not yet well understood. This paper compared methods of analytical inverse analyses, as well as finite-element modeling and nondestructive testing (NDT), for determining UHPFRC material properties based on plates and R-UHPFRC members’ test results. It was demonstrated that UHPFRC in the tensile zone of R-UHPFRC members can enter into compression during unloading, influencing the structural response under service loading.

2022

Quantification of influence of monitoring duration on measured traffic action effects on fatigue of RC deck slabs of road bridges

Eugen Brühwiler, Bartlomiej Wojciech Sawicki

The safety of existing bridges may be assessed using data from monitoring. The fatigue damage induced during observation period is extrapolated to the total service duration of a structure, and the reserve capacity is estimated. However, due to the randomness of road traffic, there exists a risk of underestimation of damage using a short-term monitoring campaign. This paper analyses the influence of monitoring duration on the obtained results using datasets collected during two long-term (>3 years) dynamic monitoring campaigns. Two road bridges with different nature of traffic are considered: (a) a heavily loaded two-lane highway viaduct and (b) a road viaduct with a bi-directional traffic. The deck slabs of both bridges are monitored using strain gauges installed on reinforcement bars. The daily, seasonal, year-to-year and COVID-19 lockdown-induced variations of measured action effects and calculated equivalent fatigue damage are discussed. The resampling method is used for simulation of possible short-term monitoring campaigns during the period considered, with different order of heavy vehicles arriving. The Extreme Value Theory serves to answer what is the required monitoring duration for reliable results. Possible ways of considering the monitoring duration in the fatigue damage calculation are discussed, and the methodology for damage extrapolation proposed.

TAYLOR & FRANCIS LTD2022

Deformational behavior and damage mechanism of R-UHPFRC beam subjected to fatigue loading

Antoine Bassil, Eugen Brühwiler, Bartlomiej Wojciech Sawicki

The fatigue behavior of a reinforced UHPFRC (Ultra High Performance Fiber Reinforced Cementitious composite) T-shaped beam under four-point bending is investigated. The beam was subjected to a fatigue loading range equal to 49% of the static resistance and failed after 0.88 million cycles. It was instrumented with extensometers, strain gauges and distributed fiber optic sensors for strain monitoring. The fatigue process consists of three stages: with rapid, stable and again rapid growth of strains during 10%, 80% and 10% of total number of fatigue cycles, respectively. Except of the first 10%, this process takes place locally; therefore, it cannot be followed with the deflection measurement. During the stable stage, growth of strain occurs at minimum loading level in the fatigue cycle, indicating a fatigue damage process under tensile-compressive response of UHPFRC. Advanced fatigue crack propagation in the reinforcement bar determines the location of rupture of the beam. When the remaining cross-section of the rebar does not suffice to carry the tensile load, stress is transmitted to the encompassing UHPFRC causing its fast deterioration. Complete rupture of the rebar occurs only at the end of the test, when the beam collapses.

2021