Publications de Navid Sohrabi | EPFL Graph Search

Quantitative prediction of crystallization in laser powder bed fusion of a Zr-based bulk metallic glass with high oxygen content

Roland Logé, Jamasp Jhabvala, Navid Sohrabi, Hossein Ghasemi Tabasi, Toni Ivas

One of the main challenges in the fabrication of bulk metallic glasses (BMGs) via laser-based additive manufacturing (AM) is undesirable crystal phase formation, which usually deteriorates the mechanical properties of the BMG fabricated parts. Understandin ...

Elsevier Sci Ltd2024

Laser powder-bed fusion of a high entropy alloy with outstanding intrinsic mechanical properties

Roland Logé, Cyril Cayron, Jamasp Jhabvala, Václav Pejchal, Navid Sohrabi

In the past few years, laser powder-bed fusion (LPBF) of high entropy alloys (HEAs) has gained significant interest. We investigated a HEA (PdPtRhIrCuNi) elaborated by LPBF, and studied its microstructure and mechanical properties. This alloy has potential ...

ELSEVIER SCIENCE SA2023

An investigation on the fatigue behavior of additively manufactured laser shock peened AlSi7Mg alloy surfaces

Roland Logé, Navid Sohrabi, Milad Hamidi Nasab

In the recent years, laser powder bed fusion of aluminum alloys has attracted extensive attention due to their capacious application in the biomedical, aerospace, and other industrial sectors. This is due to the combined capabilities of the laser powder be ...

ELSEVIER SCIENCE INC2023

Direct observation of crack formation mechanisms with operando Laser Powder Bed Fusion X-ray imaging

Roland Logé, Helena Van Swygenhoven, Jamasp Jhabvala, Eric Boillat, Navid Sohrabi, Hossein Ghasemi Tabasi, Samy Hocine

Laser powder bed fusion (L-PBF) is a versatile additive manufacturing process that can print geometrically complex metal parts for a variety of applications. However, poor control of defect formation during processing hampers its widespread industrial adop ...

ELSEVIER2022

Additive Manufacturing of Bulk Metallic Glasses-Process, Challenges and Properties: A Review

Roland Logé, Jamasp Jhabvala, Navid Sohrabi

Bulk Metallic Glasses (BMG) are metallic alloys that have the ability to solidify in an amorphous state. BMGs show enhanced properties, for instance, high hardness, strength, and excellent corrosion and wear resistance. BMGs produced by conventional method ...

MDPI2021

Additive manufacturing of a precious bulk metallic glass

Roland Logé, Jamasp Jhabvala, Güven Kurtuldu, Antonia Neels, Navid Sohrabi, Annapaola Parrilli

For the first time, a high-density amorphous and crack-free bulk metallic glass (BMG) based on a precious metal (PdCuNiP) was produced via additive manufacturing (AM). Laser powder-bed fusion (LPBF) was used for the fabrication of the samples, and led to a ...

2021

Fatigue Performance of an Additively Manufactured Zr-Based Bulk Metallic Glass and the Effect of Post-Processing

Roland Logé, Jamasp Jhabvala, Baptiste Thomas Jean Rouxel, Annapaola Parrilli, Navid Sohrabi, Milad Hamidi Nasab

Fatigue is the most common cause of failure of mechanical parts in engineering applications. In the current work, we investigate the fatigue life of a bulk metallic (BMG) glass fabricated via additive manufacturing. Specimens fabricated via laser powder-be ...

MDPI2021

Critical crystallization properties of an industrial-grade Zr-based metallic glass used in additive manufacturing

Roland Logé, Jamasp Jhabvala, Navid Sohrabi

The major challenge to overcome when processing metallic glasses (MGs) is to avoid crystallization. Therefore, time-temperature-transformation (TTT) diagrams are used, but they are often derived from experiments in which heating or cooling rates are limite ...

2021

Laser powder-bed fusion of metallic alloys with enhanced microstructures and properties

Navid Sohrabi

Laser powder-bed fusion (LPBF) is an additive manufacturing (AM) process that uses a laser to selectively melt a powder bed. This process can build dense samples with complicated geometries from a wide variety of metallic alloys. In this thesis, LPBF of al ...

EPFL2021

Tensile and Impact Toughness Properties of a Zr-Based Bulk Metallic Glass Fabricated via Laser Powder-Bed Fusion

Roland Logé, Jamasp Jhabvala, Antonia Neels, Navid Sohrabi, Annapaola Parrilli

In the past few years, laser powder-bed fusion (LPBF) of bulk metallic glasses (BMGs) has gained significant interest because of the high heating and cooling rates inherent to the process, providing the means to bypass the crystallization threshold. In thi ...

MDPI2021