Publications de Diana Londoño Zuluaga

Influence of temperature on phase assemblages of belite-ye'elimite cement

Karen Scrivener, Barbara Lothenbach, Natechanok Chitvoranund, Diana Londoño Zuluaga

This paper studies the effect of temperature on the phase assemblages of belite-ye'elimite cement. A comparison is made between thermodynamic modelling and experimental data at 28 and 180 days of hydration at 5, 20, 40, and 60 degrees C. The fast reaction ...

Pergamon-Elsevier Science Ltd2023

Does carbon footprint reduction impair mechanical properties and service life of concrete?

Karen Scrivener, Diana Londoño Zuluaga

The aim of this study is to evaluate how much the changes in the concrete mix design, which enable carbon footprint reduction, are impacting mechanical properties and predicted service life of concrete structure. The starting point of this study was concre ...

SPRINGER2023

Quantitative phase analysis of anhydrous clinker Portland using Rietveld method

Diana Londoño Zuluaga

Modern cements are complex materials with well-defined compositions that reach to high and consistent results. Automated techniques such as Rietveld analysis lead to provide an understanding of the composition and polymorphism of cement phases that could l ...

2023

Report of RILEM TC 267-TRM phase 3: validation of the R-3 reactivity test across a wide range of materials

Karen Scrivener, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, François Henri Avet, Mohsen Ben Haha, Xuerun Li, Pawel Tadeusz Durdzinski, Diana Londoño Zuluaga

RILEM TC 267 TRM- "Tests for Reactivity of Supplementary Cementitious Materials" recommends the Rapid Reliable Relevant (R-3) test as a method for determining the chemical reactivity of supplementary cementitious materials (SCMs) in Portland cement blends. ...

SPRINGER2022

The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay

Karen Scrivener, Diana Londoño Zuluaga

The objective of this study is to analyse the mechanical and durability properties of a high-performance mortars based on low grade kaolin clay and the effect of electrical conductivity and pore microstructure on the chloride penetration resistance. A tota ...

ELSEVIER2022

Report of RILEM TC 267-TRM phase 2: optimization and testing of the robustness of the R3 reactivity tests for supplementary cementitious materials

Karen Scrivener, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, François Henri Avet, Mohsen Ben Haha, Xuerun Li, Pawel Tadeusz Durdzinski, Shashank Bishnoi, Diana Londoño Zuluaga, Anuj Parashar

The results of phase 1 of an interlaboratory test, coordinated by the RILEM TC 267-TRM "Tests for Reactivity of Supplementary Cementitious Materials" showed that the R-3 (rapid, relevant, reliable) test method, by measurement of heat release or bound water ...

SPRINGER2022

Interlaboratory Test Program to Determine the Precision of the R3 Test Method (ASTM C1897-20) for Measuring Reactivity of Supplementary Cementitious Materials

Karen Scrivener, Ruben Anton Snellings, Diana Londoño Zuluaga

The substitution of portland clinker by supplementary cementitious materials (SCMs) is one of the main avenues for the further decarbonization of cement production. To secure future SCM supplies, generic and performance-related test methods for SCMs are re ...

AMER SOC TESTING MATERIALS2022

Screening Regionally Available Natural Resources Andwaste Streams as Potential Supplementary Cementitious Material

Karen Scrivener, Diana Londoño Zuluaga

The usage of industrial by-products and natural resources has already been acknowledged as a viable option for lowering the CO2 emissions in cement production. The utilization of locally available materials as supplementary cementitious material (SCM) pres ...

Springer Nature (Switzerland)2021

Hydration development and thermal performance of calcium sulphoaluminate cements containing microencapsulated phase change materials

Diana Londoño Zuluaga

Microencapsulated phase change materials (MPCM) incorporated in buildings walls can reduce indoor temperature fluctuations, conserving energy and enhancing thermal comfort. MPCM were incorporated in calcium sulphoaluminate cement (CSA) at high concentratio ...

Pergamon-Elsevier Science Ltd2020

Regional Waste Streams as Potential Raw Materials for Immediate Implementation in Cement Production

Karen Scrivener, Diana Londoño Zuluaga

There is an urgent need to apply available technologies to reduce the environmental impact of the construction industry. One of the possible solutions that can be implemented immediately is the industrial symbiosis between the waste-producing industries on ...

2020