Personne

Gian Luca Barbruni

Biographie

Gian Luca Barbruni achieved his BSc and his MSc in Biomedical Engineering with specialisation in Biomedical Instrumentation at the Politecnico di Torino in 2017 and 2019, respectively.During his master thesis, supervised by Prof. Danilo Demarchi from Politecnico di Torino and titled “Body Dust: Feasibility study on signal transmission for sub-100μm-size active wireless biosensors”, he spent a semester of research at Integrated Circuit Laboratory (ICLAB) of Neuchâtel under the supervision of Prof. Sandro Carrara from École Polytechnique Fédérale de Lausanne (EPFL), Switzerland. He discusses about the feasibility on creating an UltraSound (US) communication circuit to wirelessly transmit outside the body diagnostic information from multiplexed biosensors chip built on the top layer of a drinkable CMOS “Body Dust” cube. The results of the feasibility study have been published showing promising results with sub-10 µW of power consumption and a total chip area of 43 x 44 µm2.He was a Research Assistant at the Department of Electronic Engineering (DET) of Politecnico di Torino.Actually he is conducting his PhD focusing on design and fabrication of analog and digital circuits for ultra-miniaturized CMOS for vision prosthesis, directed by Prof. Diego Ghezzi at Medtronic Chair in Neuroengineering in Geneva and co-directed by Prof. Sandro Carrara at ICLAB in Neuchâtel.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.