Microfabricated electrically conducting and wear-resistant nanoprobes for scanning probe applications
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A microscopic four-point probe (micro4PP) for resistivity measurements on thin films was designed and fabricated using the negative photoresist SU-8 as base material. The device consists of four microscopic cantilevers, each of them supporting a probe tip ...
This thesis analyzes the properties of heavily doped nanocrystalline titanium dioxide. Thin films were deposited by magnetron sputtering with either water vapor as reactive gas or a periodically interrupted oxygen supply. The samples were at the same time ...
The aim of this thesis work is to study the spin-dependent transport in multiwalled carbon nanotubes (MWNT). To do so, the electrical resistance of MWNT contacted between ferromagnetic electrodes has been measured, as a function of the contacts magnetic co ...
In the past, conducting AFM probes have been made by coating standard Si-cantilevers and tips with a thin film of e.g. tungsten (W). Here, we describe a new AFM probe made entirely out of tungsten. The fabrication involves microfabrication techniques such ...
Platinum silicide films are widely used in silicon devices for ohmic and Schottky contacts. It has been demonstrated in the recent years that Schottky barriers employing ultra-thin platinum silicide films (thickness < 10 nm) are useful for photodetection i ...
Conductive atomic force microscopy (C-AFM) was used to study the dielectric breakdown of SiO/sub 2/ layers at a nanometric scale. First, bare oxide regions were stressed and broken down using the tip as the metal electrode of a MOS structure. The results s ...
Conventional Hall devices are widely employed to measure magnetic fields produced by millimetre sized (or larger) current-caring conductors or permanent magnets with a standard active area of about (100 um)^2. Micro-Hall sensors have recently emerged as a ...
A new electrically conductive photosensitive composite resist has been formulated and used to build microcomponents. This composite material is based on the SU-8 photopolymer, an insulating negative-tone photoresist, in which silver nano-particles have bee ...
This thesis deals with the development of microfabrication technologies based on photoplastic structuring by lithographic and molding techniques. These technologies, combined with an original releasing method, allow for the simple fabrication of pseudo thr ...
Lithography on (100) single-crystal silicon and amorphous silicon is performed by electric-field-enhanced local oxidation of silicon using an atomic force microscope (AFM). Amorphous silicon is used as a negative resist to pattern silicon oxide, silicon ni ...