Stress–strain curveIn engineering and materials science, a stress–strain curve for a material gives the relationship between stress and strain. It is obtained by gradually applying load to a test coupon and measuring the deformation, from which the stress and strain can be determined (see tensile testing). These curves reveal many of the properties of a material, such as the Young's modulus, the yield strength and the ultimate tensile strength. Generally speaking, curves representing the relationship between stress and strain in any form of deformation can be regarded as stress–strain curves.
Critère de plasticitéUn critère de plasticité, ou critère d'écoulement plastique, est un critère permettant de savoir, sous des sollicitations données, si une pièce se déforme plastiquement ou si elle reste dans le domaine élastique. De nombreux essais ont montré que l'on pouvait utiliser deux critères principaux : le critère de Tresca-Guest ou le critère de von Mises. En résistance des matériaux, on désire parfois rester dans le domaine élastique, on parle alors de critère de résistance.
Yield (engineering)In materials science and engineering, the yield point is the point on a stress-strain curve that indicates the limit of elastic behavior and the beginning of plastic behavior. Below the yield point, a material will deform elastically and will return to its original shape when the applied stress is removed. Once the yield point is passed, some fraction of the deformation will be permanent and non-reversible and is known as plastic deformation.
Prelog strainIn organic chemistry, transannular strain (also called Prelog strain after chemist Vladimir Prelog) is the unfavorable interactions of ring substituents on non-adjacent carbons. These interactions, called transannular interactions, arise from a lack of space in the interior of the ring, which forces substituents into conflict with one another. In medium-sized cycloalkanes, which have between 8 and 11 carbons constituting the ring, transannular strain can be a major source of the overall strain, especially in some conformations, to which there is also contribution from large-angle strain and Pitzer strain.
Tension de cycleEn chimie organique, la tension de cycle ou contrainte cyclique désigne la déstabilisation d'une molécule cyclique, telle un cycloalcane, causée par l'orientation spatiale des atomes qui la composent. Cette tension provient d'une combinaison (1) de contrainte d'angle, (2) de contrainte de torsion (ou tension de Pitzer) et (3) de la tension trans-annulaire (ou contrainte de van der Waals).
Strain-rate tensorIn continuum mechanics, the strain-rate tensor or rate-of-strain tensor is a physical quantity that describes the rate of change of the deformation of a material in the neighborhood of a certain point, at a certain moment of time. It can be defined as the derivative of the strain tensor with respect to time, or as the symmetric component of the Jacobian matrix (derivative with respect to position) of the flow velocity. In fluid mechanics it also can be described as the velocity gradient, a measure of how the velocity of a fluid changes between different points within the fluid.
Stress–strain analysisStress–strain analysis (or stress analysis) is an engineering discipline that uses many methods to determine the stresses and strains in materials and structures subjected to forces. In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighboring particles of a continuous material exert on each other, while strain is the measure of the deformation of the material. In simple terms we can define stress as the force of resistance per unit area, offered by a body against deformation.
Processus quasi statiqueUne transformation est dite quasi statique si tous les états intermédiaires du système thermodynamique au cours de la transformation sont des états définis, proches d'états d'équilibre. Cela implique que le déséquilibre des variables d'état, responsable de la transformation, soit infiniment petit. Pour qu'une transformation soit quasi statique, il faut donc qu'elle soit très lente, de manière que l'on puisse considérer qu'elle est constituée d'une succession d'états d'équilibre.
Reversible process (thermodynamics)In thermodynamics, a reversible process is a process, involving a system and its surroundings, whose direction can be reversed by infinitesimal changes in some properties of the surroundings, such as pressure or temperature. Throughout an entire reversible process, the system is in thermodynamic equilibrium, both physical and chemical, and nearly in pressure and temperature equilibrium with its surroundings. This prevents unbalanced forces and acceleration of moving system boundaries, which in turn avoids friction and other dissipation.
Processus thermodynamiqueUn processus thermodynamique, ou une transformation thermodynamique, est une transformation (ou une série de transformations) chimique ou physique d’un système partant d’un état d’équilibre initial pour aboutir à un état d’équilibre final.
