A semi-discrete and non-local crystal plasticity model for nanocrystalline metals
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Deformation mechanisms in nanocrystalline electrodeposited Ni (26 nm) and Ni-Fe (12 nm) are studied by strain rate sensitivity experiments and in situ mechanical testing during X-ray diffraction. We find a relatively low strength for Ni-Fe, which may be as ...
We propose a minimal model for the response of seedlings to pullout constraints. Central to our approach is the idea of capturing not only average mechanical properties but also the stochastic component of the uprooting process. Our model accounts on one h ...
The continuous matrices of atomic displacements and lattice distortion from face-centered-cubic (fcc) to body-centered-cubic (bcc) phases compatible with the hard-sphere geometry of iron atoms are calculated for different possible final orientation relatio ...
Microstructure evolution has been studied in the nickel-based superalloy PER®72 subjected to hot torsion, to annealing below the primary γ' solvus temperature and to annealing at a supersolvus temperature, with a special emphasis on grain size and twin con ...
Magnesium (Mg) alloys have recently been put under the spotlight for their specific strength, the highest among structural metals. Although the mechanical behaviour of Mg alloys at quasi-static strain rates has been extensively modelled in the recent years ...
The microstructure of porous silver layers produced under different low temperature pressure-assisted sintering conditions is characterized and linked with the mechanical behavior studied insitu during X-ray diffraction. Peak profile analysis reveals impor ...
A monocrystalline 18-carat yellow gold sample is deformed stepwise from 2% to 12% at room temperature. The mechanical loss spectrum is recorded and analysed. At low deformations the exponential high temperature background increases. At a critical deformati ...
In situ Laue analysis during microcompression is carried out on Mo-alloy pillars containing defects due to focused ion beam milling or pre-strain. Independently of how the defects are introduced, if the diffraction peaks are streaked prior to deformation, ...
The combined effect of dislocation source strength tau(s), dislocation obstacle strength tau(obs), and obstacle spacing L(obs) on the yield stress of single crystal metals is investigated analytically and numerically. A continuum theory of dislocation pile ...
Three newly identified cross-slip mechanisms from atomistic simulations of fcc crystals, namely surface, bulk and intersection cross-slip types, were hierarchically informed into discrete dislocation dynamics simulations. The influence of each cross-slip t ...