Design and Function of Novel Superplasticizers for More Durable High Performance Concrete (Superplast Project)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Durability and safety of concrete structures are fully governed by mechanical properties. This is especially true at early age, when cement matrix is not yet fully developed, and phase arrangement becomes critical for understanding mechanical behavior. Thi ...
Controlled low-strength material (CLSM) mixture design remains a trial-and-error process. A new approach using relative proportioning of the constituent materials instead of prescribed mass contents is proposed. Relative proportions allow for independent a ...
A preliminary assessment of conditions for the industrial manufacture of a new cementitious system based on clinker-calcined clay and limestone, developed by the authors, referred as "low carbon cement" is presented. The new cement enables the substitution ...
High-performance concrete is sensitive to early-age cracking, mainly due to its rapidly-developing autogenous shrinkage. Autogenous shrinkage and internal relative humidity (RH) decrease are direct consequences of the emptying of capillary pores due to cem ...
Calcium aluminate cements (CAC) are often used in combination with calcium sulfate and Portland cement for special applications where rapid setting, rapid drying and shrinkage compensation are required. A growing fraction of the clinker, which has the high ...
Experimental work has been done to determine changes in the particle shape of portlandite grown in the presence of different ions. To quantify the experimentally observed changes in morphology a new analysis tool was developed, allowing the calculation of ...
The reemergence in the early eighteenth century of the technology and use of concrete provide the starting point for this first volume of the Treatise on Concrete. In this book are described and analyzed, for the first time, the various contributions that ...
The microstructural aspects of iron sulfide degradation in dam concrete were investigated by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) in both dam concrete samples and laboratory concrete. The results show that iron sulfid ...
The durability of concrete is a major challenge for the construction, which devotes one third to one half of its annual investment to building maintenance. The lack of field data regarding concrete durability, especially in the case of exposure to sulfate ...
Alkali-activatedslag(AAS) binders are obtained by a manufacturing process less energy-intensive than ordinary Portland cement (OPC) and involves lower greenhouse gasses emission. These alkaline cements allow the production of high mechanical strength and d ...
