Processing of fibre and porosity gradients in cellular thermoplastic composites
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In the impregnation process, when pressure is applied, the dry fiber preform is first compressed and then unloads as the matrix flows within the pores. It has been shown earlier that for glass mat-reinforced thermoplastic (GMT) materials, the time to provi ...
Phosphate glass (PG) of the composition 0.46(CaO)–0.04(Na2O)–0.5(P2O5) was used as filler in poly-L-lactic acid (PLA) foams developed as degradable scaffolds for bone tissue engineering. The effect of PG on PLA was assessed both in bulk and porous composit ...
Bone is a natural cellular composite, with a gradient structure going from a loose interconnected core to an outer dense wall, thus minimising bone weight while maintaining a high mechanical performance. Bone can be repaired using either auto- or allo- gra ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
In automotive engineering, the main load bearing structure (Body-in-White, BIW) has traditionally been manufactured using metals such as steel and light alloys. In order to satisfy upcoming European regulations on CO2 emissions, considerable weight reducti ...
Metal matrix composites are known for their excellent specific mechanical properties. Nevertheless, because of the thermal expansion mismatch between the matrix and the reinforcements, thermal stresses arise at the interfaces of such materials. In order to ...
A method is presented for studying fibre damage in continuous fibre reinforced composites. It is based on contrasting the transmission of light through intact translucent fibres with the light through fractured or dead-ended fibres. The method is applied i ...
The influence of the initial configuration of glass mat and polypropylene on the deconsolidation during post-processing of the resulting composite is investigated. Deconsolidation experiments of a classic type of glass mat reinforced thermoplastic (GMT) pr ...
The aim of this work is to integrate polypropylene/montmorillonite (MMT) nanocomposite matrices into conventional fibre-reinforced composites. Two types of composite have been considered: long fibre-reinforced composites from co-woven glass fibre and nanoc ...
The potential of pulp fiberreinforced thermoplastics is currently not fully explored in composites. One of the main reasons is that pulp fibers are extracted for the use in papermaking and are thus not optimized for use as reinforcements in thermoplastics ...
