Tensile and fatigue properties of two titanium alloys as candidate materials for fusion reactors
Publications associées (66)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The main goal of this work was to manufacture an oxide dispersion strengthened (ODS) reduced activation ferritic steel from a pre-alloyed, gas atomised Fe-14Cr-2W-0.2Ti (in wt.%) powder mechanically alloyed with either 0.3%Y2O(3) or 0.5%Fe2Y particles and ...
Welding is an important joining method for the work with metals. During the welding process, the material is heated and deforms plastically which leads a change in microstructure in the heat affected zone, to complex residual stress distributions, and dist ...
In this work, the tribocorrosion behavior of Ti-12.5Mo, Ti-13Nb-13Zr and Ti-29Nb-13Ta-4.6Zr beta titanium alloys which are candidate biomaterials for joint prostheses is studied against ultra high molecular weight polyethylene in Hank's balanced salt solut ...
A W-2Y material has been produced by powder metallurgy techniques including mechanical alloying of W and Y elemental powders in an argon atmosphere, followed by hot isostatic pressing of the milled powder at 1320 degrees C under a pressure of 200 MPa for 2 ...
The main goal of this work was to manufacture an oxide dispersion strengthened (ODS) reduced activation ferritic steel from a pre-alloyed, gas atomised Fe-14Cr-2W-0.2Ti (in wt.%) powder mechanically alloyed with either 0.3%Y2O(3) or 0.5%Fe2Y particles and ...
This book presents a refined methodology to predict fatigue life of high-strength steels: Uniform Material Law (UML) for High-Strength Steels. In contrast to other available methods, UML is a handy method as only tensile strength data of metals are needed ...
This thesis is an exploration of deformation and fracture properties of a novel two-phase α2 + γ Ti46Al8Ta (at.%) alloy featuring a "convoluted" microstructure, produced by partners within a European Union project named IMPRESS. Properties of this alloy ar ...
Oxide dispersion strengthened (ODS) steels are candidate materials for advanced electric energy and heat generation plants (nuclear, fossil). Understanding the degradation of mechanical properties of these alloys as a result of service exposure is necessar ...
The structure and phase stability of binary tungsten-vanadium and tungsten-tantalum alloys are investigated over a broad range of alloy compositions using ab initio and cluster expansion methods. The alloys are characterized by the negative enthalpy of mix ...
In this work, a low-firing thick-film materials system allowing fabrication of piezoresistive sensors on surgical alloys is presented in detail, with application to a force-sensing surgical instrument. The system comprises a series of individual thick-film ...