Impact of irradiation on the tensile and fatigue properties of two titanium alloys
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
We examine, in this work, the integration and high-strain response of piezoresistive thick-film resistors on titanium and titanium alloy, as compared with ferritic stainless steel and the standard alumina substrates. In general, titanium and its alloys are ...
During the up and down cycles of a fusion reactor, the first wall is exposed concomitantly to a flux of energetic neutrons that generates radiation defects and to a thermal flux that induces thermal stresses. The resulting strains may exceed the elastic li ...
The microstructural characterization of two titanium alloys, Ti5Al2.5Sn and Ti6Al4V, was performed. These alloys were selected as representatives of the alpha and alpha + beta titanium families, to investigate their possible application as structural mater ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
The purpose of this study was to investigate the barrier efficiency of a thick thermal spray deposit on the alpha-titanium alloy, Ti-5Al-2.4Sn against hydrogen penetration. Therefore, a duplex coating has been applied by plasma spraying using a Sulzer Metc ...
Ultra-High Performance Fibre-Reinforced Concretes (UHPFRC) have high mechanical strengths (fU,c > 150 MPa, fU,t > 6 MPa) and exhibit quasi-strain hardening in tension. Their very low permeability prevents the ingress of detrimental substances. In composite ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
Titanium alloys are considered as potential candidate structural materials for the first wall, the blanket and the magnetic coil structures of fusion reactors. Titanium alloys are interesting materials because of their high specific strength and low elasti ...
Project aim: optimised piezoresistive thick-film compositions, especially for low-temperature applications on aluminum alloys, titanium alloys, steel and glass ...
A review of the microstructure of irradiated reduced activation ferritic/martensitic steels is presented, with a focus on F82H. Because of its resistance to irradiation induced hardening, swelling and low irradiation induced temperature shift in the ductil ...