Plastic behaviour of icosahedral Al-Cu-Fe quasicrystals: Experiment and modelling
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In the ITER design, CuCrZr has been selected as the heat sink material for components of the first wall and the divertor. The objective of this work is to check the material fatigue performance when the CuCrZr alloy is cyclically deformed concurrently with ...
During the up and down cycles of a fusion reactor, the first wall is exposed concomitantly to a flux of energetic neutrons that generates radiation defects and to a thermal flux that induces thermal stresses. The resulting strains may exceed the elastic li ...
Undertaken in the field of design methods for flexible pavement, the present study focuses on the introduction of traffic loads, applied mainly to mechanistic empirical methods. In such research, strains due to traffic loads — calculated by pavement modeli ...
The tensile behaviour of composites produced by infiltrating ceramic particle beds with high purity (99.99%) At is studied as a function of reinforcement size and chemistry (Al2O3 and B4C). The yield stress is higher in composites containing B4C particles, ...
This paper focuses on the constitutive behavior of the F82H ferritic/martensitic steels internationally investigated in the frame of the fusion material development program. Tensile tests were carried out in the temperature range (80-723 K) at different st ...
By means of a Gleeble machine, the flow stress at steady-state creep in an AA3103 aluminium alloy has been measured for temperatures and strain rates relevant for thermally induced deformations in DC casting. The strain rate has been determined by measurin ...
In this paper, the behaviour of fibre Bragg grating sensors subjected to transversal as well as axial strains is characterized, both in the case of low-birefringent and polarization-maintaining single-mode optical fibres. Two configurations are considered. ...
In an effort to better understand the plasticity of tempered martensitic steels, uniaxial tension and compression tests were carried out. The temperature dependence of both the yield stress and the post-yield stress behavior were compared, and it was shown ...
A comparison of experimental observations and computer simulations shows that trends in the occurrence and severity of center cracks in direct-chill (DC) cast ingots due to different initial casting speed histories may best be explained by the changes in v ...
Investigates the use of embedded optical fiber Bragg gratings to measure strain near a stress concentration within a solid structure. Due to the nature of a stress concentration (i.e., the strong nonuniformity of the strain field), the assumption that the ...
