Synthesis of monodispersed model catalysts using softlanding cluster deposition

Laurent Klinger
De Gruyter, 2002
Article

Résumé

In nanocatalysis, clusters deposited on solid, well-defined surfaces play an important role. For the detection of size effects it is, however, important to prepare samples consisting of deposited clusters of a single size, as their chemical properties change with the exact number of atoms in the cluster. In this paper, the experimental tools are presented to prepare such model systems. The existence of monodispersed clusters is confirmed by various experimental findings. First, the carbonyl formation of deposited Ni-n clusters shows no change in the nuclearity when comparing the size of the deposited clusters with one of the formed carbonyls. Second, scanning tunneling microscopy (STM) studies show that fragmentation of Si-n clusters upon deposition can be excluded. In addition, the adsorption behavior of CO on deposited Pd atoms points to the existence of single atoms on the surface. Furthermore, CO oxidation results on Au-n clusters confirm the existence of monodispersed clusters trapped on well-defined adsorption sites. Finally, we use Monte-Carlo simulations to define the range of clusters and defect densities, for which monodispersed clusters can be expected.

Official source

https://infoscience.epfl.ch/record/119954?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

This thesis presents combined experimental and theoretical investigations of nanoscale, surface-supported magnets based on rare earths (RE) to understand and control the magnetic properties down to the scale of single atoms. We present the effects of adatom-substrate interaction on the magnetic properties of isolated single RE atoms using x-ray absorption spectroscopy (XAS), x-ray magnetic circular dichroism (XMCD), and multiplet analysis. Our systematic investigations of Dy, Ho, Er, and Tm adatoms adsorbed on Pt(111), Cu(111), Ag(100), and Ag(111), reveal that the REs can possess two types of 4f occupations, namely divalent 4f^n and trivalent 4f^(n-1). The trivalent state is realized in presence of low promotion energy of the RE and strong hybridization of their external spd shell with the surrounding environment. Notably, none of the REs exhibit magnetic hysteresis, suggesting that magnetic relaxation is faster than about 10 seconds. We also report on the effect of adatom-adatom interaction by studying the size-dependent magnetic properties of Er clusters adsorbed on Cu(111). Combining XMCD, scanning tunneling microscopy (STM), and mean-field nucleation theory we reveal that the adatom-adatom interaction dominates over the adatom-substrate interaction in Er clusters starting from the size of three atoms. Consequently the easy axis of Er changes from in-plane for the single atoms and dimers to out-of-plane for trimers and bigger clusters. In addition, the out-of-plane magnetic anisotropy of 2.9 meV/atom results in magnetic hysteresis at 2.5 K in all clusters starting from trimers. With a magnetic lifetime of approximately 2 minutes at 0.1 T, the Er trimers are one of the smallest metal-supported ferromagnetic clusters observed so far. The investigation of adatom-adatom interaction is further extended by studying 4f-3d heterodimers namely, Ho-Co adsorbed on thin insulating layers of MgO. Their magnetic easy axis is oriented out-of-plane. Using spin-polarized STM we have detected spin-excitations in these heterodimers at ±20 and ±8 meV. We have identified the origin behind these spin-excitations using an effective spin Hamiltonian model, which indicates that, given a ferromagnetic exchange interaction between Ho and Co, the most intense feature at ±20 meV corresponds to a transition in which the spin moment of Co is strongly diminished. This is further accompanied by an overall change of the total magnetic moment of the heterodimer, i.e., ¿J=-1. In contrast, the weaker transition at ±8 meV occurs following a change in the out-of-plane moment of Ho while the total moment of the heterodimer remains intact i.e., ¿J=0. Notably, we observe an effective g factor of 3.1 for the ±20 meV transition, which significantly exceeds the free electron value of 2. In addition, the ferromagnetic coupling between Ho and Co is very unusual compared to the ferrimagnetic exchange interaction known for the bulk 4f-3d compounds, especially those derived from the late lanthanides. Nonetheless, this marks the first evidence of spin-excitations in the smallest 4f containing cluster. The knowledge gained on the fundamental aspects of magnetism in surface-supported REs combined with the continued parallel search for magnetic stability down to single atoms, enabled us to achieve magnetic remanence in single adatoms with lifetimes of the order of 1000 s at 2.5 K. In addition we have achieved significantly enhanced hysteresis and magnetic lifetime in TbPc2.

EPFL2017

Chargement

Etude par STM de la déposition d'agrégats d'or sur TiO2 et mesure de l'émission électronique secondaire induite par l'impact d'agrégats sur une surface

Pierre Convers

This thesis work focuses on impact and diffusion processes as well as equilibrium positions of a metal deposited on a surface. The metal is deposited in the form of clusters containing n atoms in a controlled way. Gold or silver clusters cations (Au+n and Ag+n ) are used. Their size (n ∈ [1, 9]), charge state and deposition energy (E = 10 - 4500 eV) are well defined. The surface being at room temperature during the deposition, can be annealed and transferred in a scanning tunnelling microscope (STM) after deposition. The variable temperature microscope was developed during this thesis. The approach of the tip is carried out by an axial motor, which renders the microscope very stable. The first part of this work treats of the evolution of gold deposited on a TiO2(110) surface. Position and size of gold islands created by cluster or atomic depositions are determined by STM. Compared to atomic deposition at the same energy (10 < E < 100 eV), the cluster deposition produces smaller islands with a large islands density after annealing at 800 K. Regardless the deposition conditions, gold atoms diffuse on the surface already at 300 K. The impact energy is the key parameter to reduce the diffusion by cluster or atomic implantation or defect creation. Upon a high energy deposition, part of the deposited gold is invisible to the STM. The fate of these gold atoms is unclear : they are either buried under the surface or ejected in vacuum at the impact. The control of the islands size should permit the creation of a stable system with an optimum catalytic activity (i. e. CO combustion). Research groups have shown that this activity is strongly influenced by the islands size. It is equal to zero if the diameter is greater than 5 nm. The second part of this work is devoted to the electron emission γ induced by the impact of silver clusters Ag+n on a Pt and HOPG surface. Measurements are made by varying the impact energy (and so the speed v) of size-selected clusters on a defined surface. Impact velocity ranges from 104 to 105 m/s, which is lower than the classical threshold. Nevertheless every cluster size produces an electron emission. A potential emission (γ(v=0) ≠ 0) is observed for the monomer on both surfaces, which is caused by excited ions in a metastable state. The γ(v) curves are increasing, and no mesurable oscillation are observed. This does not confirm earlier work by Meiwes-Broer et al. These authors found oscillations in γ on similar systems relating them to the electronic structure of the clusters and the surface. A model based on heating of the electron gas is developed. This model gives good agreements with the γ(v) curves. The electronic temperature is estimated to 3000-8000 K. Similar behavior on both surfaces (Pt and HOPG) depending of the cluster size is shown. This behavior is probably related to the geometrical structure of the clusters. Finally, a more pronounced molecular effect is observed for the HOPG : the number of electrons emitted by the impact of a Ag+n is up to 7 times higher than the number of electrons emitted by impacts of n independent atoms. This value is smaller than 2 for the Pt surface.

EPFL2005

Chargement

Submonolayer growth of cobalt on metallic and insulating surfaces studied by scanning tunneling microscopy and kinetic Monte-Carlo simulations

Philipp Buluschek

Submonolayer epitaxial growth is obtained by the deposition of less than a complete layer of atoms on a single crystal surface. It is of fundamental interest for industrial applications (e.g. in the semiconductor industry) as well as from the point of view of basic research. For example, it is known that nanometer-sized atomic structures (nanostructures) exhibit remarkable physical and chemical properties which can differ greatly from those of bulk matter. In order to investigate these properties, it is often necessary to create large quantities of well defined and possibly spatially ordered nanostructures. One way to achieve this result is self-organized growth where one deposits atoms on a clean crystalline surface and lets the growth process evolve freely. Here, nanostructures result from the atomic diffusion and aggregation processes taking place at the surface. Understanding the exact nature of these processes is of ongoing interest in the field of nanostructure growth. In this thesis we report about submonolayer growth experiments of the ferromagnetic transition metal cobalt. Cobalt was chosen because it exhibits remarkable magnetic properties. These experiments were performed in an ultra-high vacuum chamber and molecular beam epitaxy was used to grow the nanostructures. Observations of the surface were made using a variable-temperature scanning tunneling microscope (STM). In order to get a better understanding of the atomic processes happening at the surface, we developed two adapted computational simulation methods. Kinetic Monte-Carlo (KMC) simulations were used to get an atomistic picture of the surface while mean field rate equations were integrated numerically to yield cluster densities. We study the growth of cobalt on three different surfaces. By depositing Co on a clean Pt(111) crystal surface, we observe that the platinum surface reconstructs by forming star-shaped partial dislocations for sample temperatures above 180 K (-93°C). We also observe that island densities deviate from predictions of all known models towards higher values for these same temperatures. By simulation we are able to show that insertion of Co into the topmost platinum layer creates a repulsive network of dislocations. We show that these dislocations act as diffusion inhibiting barriers and thus influence the island density by constraining the free movement of atoms at the surface. We also show that the Co dimer and trimer diffuse on Pt(111) before dissociating and are able to extract corresponding activation barriers. We also study the deposition of Co on a Ru(0001) surface which shows a more conventional temperature dependence. By comparing simulation and experiment we extract all relevant diffusion activation barriers and show that at high temperatures the Co dimer and trimer dissociate. Finally, we investigate the growth of Co on the hexagonal boron nitride superlattice which forms on a Rh(111) surface. On this surface Co clusters form three-dimensional hemispherical dots. We show how the substrate corrugation influences diffusion of Co atoms and that clusters up to the size of the pentamer can diffuse. By simulation, we also extract the relevant migrations and desorption barriers.

EPFL2008

Chargement

Etude par STM de la déposition d'agrégats d'or sur TiO2 et mesure de l'émission électronique secondaire induite par l'impact d'agrégats sur une surface

Pierre Convers

EPFL2005

Submonolayer growth of cobalt on metallic and insulating surfaces studied by scanning tunneling microscopy and kinetic Monte-Carlo simulations

Philipp Buluschek

EPFL2008

EPFL2017