MD modeling of defects in Fe and their interactions
Publications associées (63)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The continuous matrices of atomic displacements and lattice distortion from face-centered-cubic (fcc) to body-centered-cubic (bcc) phases compatible with the hard-sphere geometry of iron atoms are calculated for different possible final orientation relatio ...
Body-centered cubic metals are of high technological interest: for example tungsten as potential plasma facing component in future fusion reactors, molybdenum employed in aircraft parts, niobium as superconducting magnets, etc. The characteristics of their ...
In the quest of the structural materials for the future fusion reactor, it has been shown that ferritic/martensitic (F/M) steels are very promising candidates, with a good radiation resistance in terms of damage accumulation in the microstructure relative ...
In this study, we report our observation of the interaction between a moving dislocation and an obstacle of dislocation character in pure bcc-Fe using a TEM in situ straining experiment at room temperature. Our observations reveal that the interaction of a ...
In the current trend toward thicker aluminium plates, a major concern is the stress build-up during quenching which causes distortions during machining. Indeed, cooling rates are not high enough, especially at the core of such thick plates, to prevent any ...
Ferritic steels are the main candidates for the structural components of future fusion reactors. Because of the complexity of their structure, most of the simulation works are focused on the base phase of these materials such as alpha-Fe or Fe-Cr alloy. In ...
Molecular dynamics simulation is used to study the formation of the a(0) < 1 0 0 > binary dislocation junction in body-centered cubic Fe. Results show that under an applied strain two intersecting 1/2 a(0) < 1 1 1 > dislocations, one mobile edge and one im ...
Ferritic steels are the main candidates for the structural components of future fusion reactors. Because of the complexity of their structure, most of the simulation works are focused on the base phase of these materials such as alpha-Fe or Fe-Cr alloy. In ...
A microcasting process is developed for the production of monocrystalline microwires of pure and alloyed aluminium. The process is based on pressure infiltration of single-crystalline salt moulds; it is capable of producing wires with a diameter between 6 ...
In the fabrication of heat treatable aluminium parts, solutionising and quenching are key steps in order to obtain the required mechanical characteristics. Fast quenching is necessary to avoid coarse precipitation as this one reduces the mechanical propert ...