Mechanical behaviour of nanocrystalline electrodeposited Ni above room temperature

Florian Dalla Torre, Robin Schäublin, Philippe Spätig, Helena Van Swygenhoven
2005
Article

Résumé

Tensile properties and microstructure of Danocrystalline electrodeposited Ni at temperatures between room temperature and 330&DEG; C are presented. Above 300&DEG; C low flow stress and high tensile elongation are observed along with grain growth and segregation of sulphur to the grain boundaries causing the formation of a Ni-sulphide phase. © 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Official source

https://infoscience.epfl.ch/record/120247?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Slip-induced intergranular stress redistribution in nanocrystalline Ni

Lin Li, Steven Van Petegem, Helena Van Swygenhoven

In situ X-ray diffraction experiments performed on nanocrystalline Ni demonstrate an evolution of intergranular stress with plastic deformation that is different from coarse-grained counterparts. Using a crystal plasticity model, the X-ray diffraction footprints are linked to violent intergranular stress redistributions and special distributions of critical strengths associated with quantized intragranular slip. The model offers an alternate view to other models based on the hypotheses of the role of grain boundary sliding at small grain sizes. (C) 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Pergamon-Elsevier Science Ltd2012

Chargement

Atomistic based continuum investigation of plastic deformation in nanocrystalline copper

Jean-François Molinari, Derek Warner

A continuum model of nanocrystalline copper was developed based on results from independent atomistic calculations on 11 bicrystals containing high angle grain boundaries. The relationship between grain boundary structure and its mechanical response was investigated. Based on the atomistic calculations; a constitutive law for grain boundary interfaces was implemented within a finite element calculation that consisted of a microstructure loaded in compression. The yield strength as a function of grain size was compared to experimental data and molecular dynamics results. Calculations were performed to demonstrate the relationship between intragranular plasticity and grain boundary sliding. (c) 2005 Elsevier Ltd. All rights reserved.

2006

Chargement

The microstructure of commercially available nanocrystalline (nc) electroplated Ni foils is studied by means of Xray diffraction and transmission electron microscopy. It is shown that the microstructure is inhomogeneous and batch-dependent. Tensile properties at strain rates between 10(-5) and 10(3) s(-1) are studied and compared with the results of coarse-grained Ni. Data on strength, strain-rate sensitivity and work hardening are presented. At the highest strain rates, shear banding with local grain growth is observed in the nc structure. It is also suggested that the differences found in nc Ni for 3 and 20 mm tensile specimens are the size effects related to the inhomogeneous microstructure. (K) 2002 Published by Elsevier Science Ltd on behalf of Acta Materialia Inc.

2002

Chargement