Effect of irradiation on the microstructure and the mechanical properties of oxide dispersion strengthened low activation ferritic/martensitic steel
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...
It was recently proposed that the induction period observed during the hydration of tricalcium silicate could be explained by the build-up of ions in solution. Due to the importance of defects in this mechanism, this work describes the effect of different ...
In the quest of the structural materials for the future fusion reactor, it has been shown that ferritic/martensitic (F/M) steels are very promising candidates, with a good radiation resistance in terms of damage accumulation in the microstructure relative ...
The influence of the carbon content on the microstructure, phase transformation and hardness of an iron-based cermet is studied. The cermet is constituted by a high-alloyed steel as matrix, and TiCN particles (50 vol.%) as reinforcement. The material is pr ...
The effect of He on the primary damage induced by irradiation in ultrahigh-purity (UHP) Fe and Fe(Cr) alloys was investigated by transmission electron microscopy (TEM). Materials were irradiated at room temperature in situ by TEM in a microscope coupled to ...
Hot tearing and loss of dimensional stability are two key defects related to industrial aluminum alloy casting processes. In order to investigate their occurrence, a new semi-solid constitutive law [20] for AA5182 that takes into account cooling rate, grai ...
TMS (The Minerals, Metals & Materials Society)2012
The friction stress resulting from alloying elements in industrial alloys is an important strengthening mechanism. Since the preparation of single crystal from industrial material is difficult, no direct measurement of this quantity has been reported in li ...
Using molecular dynamics simulations with recent interatomic potentials developed for Fe, we have studied the defects in thin films of pure bcc Fe induced by the displacement cascade produced by Fe atoms of 50, 100, and 150 keV impinging under a channeling ...
In this study, a new method to assess early properties of cementitious materials by water-solvent replacement is investigated. Isopropanol was used to replace a part of mixing water of binder paste, limiting the maximum degree of hydration it can achieve. ...
The interaction between domain walls and pinning centers in ferroelectrics is of great interest from both fundamental and practical points of view. In this work, we show that, counter to intuition, the apparent velocity of domain walls can increase as the ...
