Boiling on a tube bundle

Francesco Agostini
EPFL, 2008
Thèse EPFL

Résumé

The complexity of the two-phase flow in a tube bundle presents important problems in the design and understanding of the physical phenomena taking place. The working conditions of an evaporator depend largely on the dynamics of the two-phase flow that in turn influence the heat exchange and the pressure drop of the system. A characterization of the flow dynamics, and possibly the identification of the flow pattern in the tube bundle, in thus expected to lead to a better understanding of the phenomena and to reveal on the mechanisms governing the tube bundle. Therefore, the present study aims at providing further insights into two-phase bundle flow through a new visualization system able to provide for the first time a view of the flow in the core of a tube bundle. In addition, the measurement of the light attenuation of a laser beam through the two-phase flow and measurement of the high frequency pressure fluctuations with a piezo-electric pressure transducer are used to characterize the flow. The design and the validation of this new instrumentation also provided a method for the detection of dry-out in tube bundles. This was achieved by a laser attenuation technique, flow visualization, and estimation of the power spectrum of the pressure fluctuation. The current investigation includes results for two different refrigerants, R134a and R236fa, three saturations temperatures Tsat = 5, 10 and 15 °C, mass velocities ranging from 4 to 40 kg/sm2 in adiabatic and diabatic conditions (several heat fluxes). Measurement of the local heat transfer coefficient and two-phase frictional pressure drop were obtained and utilized to improve the current prediction methods. The heat transfer and pressure drop data were supported by extensive characterization of the two-phase flow, which was to improve the understanding of the two-phase flow occurring in tube bundles.

Official source

https://infoscience.epfl.ch/record/121459?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Francesco Agostini
EPFL, 2008
Thèse EPFL

Résumé

Official source

https://infoscience.epfl.ch/record/121459?ln=fr

À propos de ce résultat

Concepts associés (14)

Concepts associés

Chargement

Publications associées (106)

Publications associées

Chargement

The complexity of two-phase flow boiling on a tube bundle presents many challenges to the understanding of the physical phenomena taking place. It is important to quantify these numerous heat flow mechanisms in order to better describe the performance of tube bundles as a function of the operational conditions. In the present study, the bundle boiling facility at the Laboratory of Heat and Mass Transfer (LTCM) was modified to obtain high-speed videos to characterise the two-phase regimes and some bubble dynamics of the boiling process. It was then used to measure heat transfer on single tubes and in bundle boiling conditions. Pressure drop measurements were also made during adiabatic and diabatic bundle conditions. New enhanced boiling tubes from Wolverine Tube Inc. (Turbo-B5) and the Wieland-Werke AG (Gewa-B5) were investigated using R134a and R236fa as test fluids. The tests were carried out at saturation temperatures Tsat of 5°C and 15°C, mass flow rates from 4 to 35 kg/m2s and heat fluxes from 15 to 70 kW/m2, typical of actual operating conditions. The flow pattern investigation was conducted using visual observations from a borescope inserted in the middle of the bundle. Measurements of the light attenuation of a laser beam through the intertube two-phase flow and local pressure fluctuations with piezo-electric pressure transducers were also taken to further help in characterising the complex flow. Pressure drop measurements and data reduction procedures were revised and used to develop new, improved frictional pressure drop prediction methods for adiabatic and diabatic two-phase conditions. The physical phenomena governing the enhanced tube evaporation process and their effects on the performance of tube bundles were investigated and insight gained. A new method based on a theoretical analysis of thin film evaporation was used to propose a new correlating parameter. A large new database of local heat transfer coefficients were obtained and then utilised to generate improved prediction methods for pool boiling and bundle boiling, including a method for predicting the onset of dryout.

EPFL2011

Chargement

Heat Transfer and Visualization of Falling Film Evaporation on a Tube Bundle

Marcel Christians

Horizontal falling film evaporators have the potential of displacing flooded evaporators in industry, due to advantages such as lower required refrigerant charge and lower pressure drop. However, there is a need to improve the understanding of falling film evaporation mechanisms to provide accurate thermal design methods. In this work, the existing LTCM falling film facility was utilized to perform falling film evaporation measurements on a single tube, a vertical row of horizontal tubes and a small tube bundle. Two enhanced boiling tubes, namely the Wolverine Turbo-B5 and the Wieland Gewa-B5, were tested using R-134a and R-236fa. The tests were carried out at a constant saturation temperature of Tsat = 5°C, liquid film Reynolds numbers ranging from 0 to 3000, and heat fluxes between 15 and 90 kW/m2 in pool boiling and falling film configurations. A visualization study was performed under adiabatic and diabatic conditions (in both single-array and bundle configurations) to study the flow. The physical phenomena governing the falling film evaporation process have been studied, and insight into their effects on the performance of tube bundles has been gained. Measurements of the local heat transfer coefficient were obtained and utilized to generate new prediction methods, including a method for predicting the onset-of-dryout film flow rate during falling film evaporation, local pool boiling and falling film heat transfer prediction methods and a falling film multiplier prediction method.

EPFL2010

Chargement

Cooling High Heat Flux Micro-Electronic Systems using Refrigerants in High Aspect Ratio Multi-Microchannel Evaporators

Etienne Costa-Patry

Improving the energy efficiency of cooling systems can contribute to reduce the emission of greenhouse gases. Currently, most microelectronic applications are air-cooled. Switching to two-phase cooling systems would decrease power consumption and allow for the reuse of the extracted heat. For this type of application, multi-microchannel evaporators are thought to be well adapted. However, such devices have not been tested for a wide range of operating conditions, such that their thermal response to the high non-uniform power map typically generated by microelectronics has not been studied. This research project aims at clarifying these gray areas by investigating the behavior of the two-phase flow of different refrigerants in silicon and copper multi-microchannel evaporators under uniform, non-uniform and transient heat fluxes operating conditions. The test elements use as a heat source a pseudo-chip able to mimic the behavior of a CPU. It is formed by 35 independent sub-heaters, each having its own temperature sensor, such that 35 temperature and 35 heat flux measurements can be made simultaneously. Careful measurements of each pressure drop component (inlet, microchannels and outlet) found in the micro-evaporators showed the importance of the inlet and outlet restriction pressure losses. The overall pressure drop levels found in the copper test section were low enough to possibly be driven by a thermosyphon system. The heat transfer coefficients measured for uniform heat flux conditions were very high and typically followed a V-shape curve. The first branch was associated to the slug flow regime and the second to the annular flow regime. By tracking the minimum level of heat transfer, a transition criteria between the regimes was established, which included the effect of heat flux on the transition. Then for each branch, a different prediction method was used to form the first flow pattern-based prediction method for two-phase heat transfer in microchannels. A non-uniform heat flux creates important temperature gradients in the evaporator, such that the data reduction procedure needs to be adapted to include heat spreading within the evaporator. To do so, a robust multi-dimensional thermal conduction scheme was developed. Once these effects were taken into consideration, the local heat transfer coefficients provided by two-phase flow were found to be the same for uniform and non-uniform heat fluxes, allowing the flow pattern-based method to be extended to non-uniform heat flux conditions. Lastly, with proper control of the mass flow, transient heat flux situations were well handled by the micro-evaporators.

EPFL2011

Chargement

Cooling High Heat Flux Micro-Electronic Systems using Refrigerants in High Aspect Ratio Multi-Microchannel Evaporators

Etienne Costa-Patry

EPFL2011