Equilibrium shape of a liquid intergranular inclusion in a stressed elastic solid
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
We report on the use of the bulge test method to characterize the mechanical properties of miniaturized buckling mode dielectric elastomer actuators (DEA). Our actuator consists of a Polydimethylsiloxane (PDMS) membrane bonded to a silicon chip with throug ...
In this paper, we investigate the effect of different process parameters on oxidation-induced strain (OIS) into a doubly-clamped silicon nanowire FET to control and finally, enhance carrier mobility. Spacer technology together with sacrificial thermal oxid ...
The origin of intragranular variations of the crystallographic orientation in hot-dip Al-Zn-Si coatings is discussed based on new experimental results and modelling. The solidification microstructure in as-received 55Al-43.4Zn-l.6Si (in wt.%) coatings depo ...
The temperature dependence of residual stresses in a WC-17.8vol.%Co cemented carbide was measured by neutron diffraction. The comparison of the WC lattice parameter within the WC-Co and within stress-free WC reference provides a measurement of lattice elas ...
Mean index changes up to 2.2 × 10-3 were demonstrated in hydrogen loaded germanium free Bi-Al-doped silica fibers. Tensile stress changes indicate a contribution of compaction to the total index change. ...
We have used in situ X-ray scattering and finite element modeling (FEM) to examine the micromechanics of deformation of in situ formed metallic-glass-matrix composites consisting of Ta-rich particles dispersed in an amorphous matrix. The strain measurement ...
Mechanisms responsible for the embrittlement of leaded "free-machining" copper alloys at intermediate temperatures (i.e. around 400 °C) are examined using a combination of microstructural and mechanical characterization. Tensile tests are conducted on pure ...
Molecular dynamics is used to examine the deformation and failure of Al-Si interfaces and of nanocomposites consisting of Al and Si nanograins loaded in tension. The modified embedded atom method, is used to describe the forces and energies in the system a ...
Intrinsic, thermal, and hygroscopic contributions to the in-plane residual stress in silicon nitride films on polyimide substrates are identified, based on iso- hygric thermal ramps and isothermal relative humidity jumps, combined with non-linear elastic m ...
