A new parameter identification method for induction machines.
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The Center for Artificial Muscle (CAM) is in the process of designing a new type of Vascular Assist Device (VAD) that uses the mechanical and electrical properties of Dielectric Elastomer Actuators (DEAs). The main challenges with these actuators are that ...
2019
With the advent of intelligent sensor nodes in everyday life, low power aspects of system design become more and more important. Adaptive body biasing is a promising methodology to achieve dynamic adaptation of the tradeoff between performance and energy b ...
EPFL2021
, , ,
An unusual negative lightning flash was recorded at the Säntis Tower on June 15, 2012. The flash did not contain an initial continuous current typical of upward negative lightning, which is the most common type of event at the Säntis Tower. The flash conta ...
2019
, ,
The main obstacle to a wide use of dc-Decay tests lies in the necessity to align the rotor with the d- or q-axis, which is very difficult to perform for high-power units. The goal of this paper is to propose and validate standstill dc-Decay measuring metho ...
Modeling the interaction of ionizing radiation, either light or ions, in integrated circuits is essential for the development and optimization of optoelectronic devices and of radiation-tolerant circuits. Whereas for optical sensors photogenerated carriers ...
EPFL2021
,
Modeling of optoelectronic devices involves long and complex numerical simulations, usually performed with TCAD tools. Numerical simulations provide accurate results for a single device but are not feasible when dealing with a full circuit comprising sever ...
Electrochemical Impedance Spectroscopy (EIS) and Equivalent Circuit Models (ECMs) are widely used to characterize the impedance and estimate parameters of electrochemical systems such as batteries. We use a generic ECM with ten parameters grouped to model ...
We compute an optimal day-ahead dispatch plan for distribution networks with stochastic resources and batteries, while accounting for grid and battery losses. We formulate and solve a scenario-based AC Optimal Power Flow (OPF), which is by construction non ...
III-V nanowires (NWs) have a great potential for solar energy applications due to their diameter-dependent optical properties, which may enhance absorption of light. In addition, core-shell radial p-i-n structures, in which the direction of light absorptio ...
We present a lumped devices network approach to simulate surface recombination effects in optoelectronics devices. The network is composed of generalized lumped devices where the excess carrier concentrations and gradients are mapped on electrical quantiti ...
