Stability analysis of the LHC cables for transient heat depositions
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The Superconducting Fault Current Limiter (SFCL) appears to be a device of great interest to efficiently build the electrical grid of tomorrow. With the recent progress made by the superconducting wires manufacturers, there are needs coming from the indust ...
The next generation of superconducting magnets for the interaction regions of particle colliders, as well as for fast cycled accelerators, will be confronted with large heat loads. In order to improve the evacuation of heat from the Nb-Ti coil towards He-I ...
CERN is performing a systematic analysis of the interconnecting bus bars of the Large Hadron Collider (LHC) main magnets. Their thermal, electrical, mechanical and hydraulic performances are addressed. In the frame of these studies, the heat transfer betwe ...
Superconducting magnets submitted to large heat loads, as the low-β quadrupoles for the LHC luminosity upgrade, need the development of new concepts of cable electrical insulation featuring a He-II porous wrapping scheme. This paper reports and discusses r ...
The energy ramp and the betatron squeeze at the CERN Large Hadron Collider (LHC) are particularly critical oper- ational phases that involve the manipulation of beams well above the safe limit for damage of accelerator components. In particular, the squeez ...
Bent-crystal channeling is a technique with a potential to increase beam-halo collimation efficiency in high-energy colliders. First measurements at the Tevatron in 2005 have shown that using a thin silicon crystal to deflect the 1-TeV proton beam halo ont ...
Numerous characteristic trends and effects have been observed in published studies on two-phase micro-channel boiling heat transfer. While macro-scale flow boiling heat transfer may be decomposed into nucleate and convective boiling contributions, at the m ...
Springer, 101 Philip Drive, Norwell, Ma 02061 Usa2010
Numerous characteristic trends and effects have been observed in published studies on two-phase micro-channel boiling heat transfer. While macro-scale flow boiling heat transfer may be decomposed into nucleate and convective boiling contributions, at the m ...
This article is the second part of a study on flow boiling of R236fa and R245fa. This part presents the heat transfer coefficients obtained in a 12.7 mm silicon evaporator composed of 135 microchannels with 85 mu m wide and 560 mu m high channels separated ...
The current study presents a one-dimensional model of confined coalescing bubble flow for the prediction of micro-channel convective boiling heat transfer. Coalescing bubble flow has recently been identified as one of the characteristic flow patterns to be ...
