Utilisation de la spectroscopie mécanique dans l'optimisation des traitements thermiques d'aciers au carbone
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The aim of this work is to examine the possibility of high performance pressure sensors based on piezoresistive thick films deposited on steel membranes, which combine the performance advantage of thin-film sensors (high-strength steel substrates, assembly ...
This work is focussed on a high carbon tool steel used for the production of files. The mechanical properties of the files depend on a hardening thermal treatment that produces a martensitic structure. Thus, the motivation for this work is technological: w ...
The limits of the parent grain reconstruction by the neighbor-to-neighbor method are shown. A new method of parent grain reconstruction from EBSD data is proposed for any phase transformation. It is based on the theoretical groupoid structure formed by the ...
Neutron-irradiation-induced embrittlement of a 2.25Cr1Mo steel is investigated by means of small punch testing along with scanning electron trucroscopy. There is an apparent irradiation-induced embrittlement effect after the steel is irradiated at about 40 ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
Different ODS EUROFER steels reinforced with Y2O3 and MgAl2O4 were elaborated by mechanical milling and hot isostatic pressing. Good compromise between strength and ductility could be obtained but the impact properties remain low (especially for the Y 2O3 ...
A simple 0D analytical model for the prediction of the take-off point observed in critical-current or current-sharing tests in cable-in-conduit conductors (CICC) is presented. This may be referred to also as the quench point and defined as the point where ...
A new procedure of X-ray line profile analysis based on the dislocation model of strain anisotropy has been applied. The dislocation densities and the subgrain size-distributions in a MANET steel are investigated in the normal condition and after cyclic de ...
Irradiation-induced transformations in sputter-deposited Ti-rich NiTi thin films have been investigated with special attention given to the effects of prior deformation on the response of martensite phase. Irradiation at low fluence was carried out at room ...
The Two-Way Shape Memory Effect (TWSME) has been widely studied in the literature. However, little attention has been paid about the out-of-equilibrium behavior of the TWSME. This paper reports some experiments, which were performed on specimens, previousl ...
