Publication

Filling Kinetics of Liquids in Nanochannels down to 27 nm Deep by Capillary Force

Nico de Rooij
2005
Article
Résumé

We report the filling kinetics of different liquids in nanofabricated capillaries with rectangular cross-section by capillary force. Three sets of channels with different geometry were employed for the experiments. The smallest dimension of the channel cross-section was respectively 27, 50, and 73 nm. Ethanol, isopropanol, water and binary mixtures of ethanol and water spontaneously filled nanochannels with inner walls exposing silanol groups. For all the liquids the position of the moving liquid meniscus was observed to be proportional to the square root of time, which is in accordance with the classical Washburn kinetics. The velocity of the meniscus decreased both with the dimension of the channel and the ratio between the surface tension and the viscosity. In the case of water, air-bubbles were spontaneously trapped as channels were filled. For a binary mixture of 40% ethanol and water, no trapping of air was observed anymore. The filling rate was higher than expected, which also corresponds to the dynamic contact angle for the mixture being lower than that of pure ethanol. Nanochannels and porous materials share many physicochemical properties, e.g., the comparable pores size and extremely high surface to volume ratio. These similarities suggest that our nanochannels could be used as an idealized model to study mass transport mechanisms in systems where surface phenomena dominate. © 2005 Elsevier Inc. All rights reserved.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Concepts associés (32)
Tension superficielle
vignette|et aux gerridés de se déplacer à la surface d'une mare. La tension superficielle est un phénomène physico-chimique lié aux interactions moléculaires d'un fluide. Elle résulte de l'augmentation de l'énergie à l'interface entre deux fluides. Le système tend vers un équilibre qui correspond à la configuration de plus basse énergie, il modifie donc sa géométrie pour diminuer l'aire de cette interface. La force qui maintient le système dans cette configuration est la tension superficielle.
Capillarité
La capillarité est le phénomène d'interaction qui se produit aux interfaces entre deux liquides non miscibles, entre un liquide et l'air ou entre un liquide et une surface. Elle est due aux forces de tension superficielle entre les différentes phases en présence. On retrouve la capillarité lorsque les buvards aspirent l’encre, les éponges s’imbibent d’eau, ou quand on trempe une partie de son morceau de sucre dans son café et que ce sucre devient tout noir. Une bougie est constituée d'une mèche et de cire ou de stéarine.
Meniscus (anatomy)
A meniscus is a crescent-shaped fibrocartilaginous anatomical structure that, in contrast to an articular disc, only partly divides a joint cavity. In humans they are present in the knee, wrist, acromioclavicular, sternoclavicular, and temporomandibular joints; in other animals they may be present in other joints. Generally, the term "meniscus" is used to refer to the cartilage of the knee, either to the lateral or medial meniscus. Both are cartilaginous tissues that provide structural integrity to the knee when it undergoes tension and torsion.
Afficher plus
Publications associées (42)

Effects of surface rigidity and metallicity on dielectric properties and ion interactions at aqueous hydrophobic interfaces

Philip Robin Loche

Using classical molecular dynamics simulations, we investigate the dielectric properties at interfaces of water with graphene, graphite, hexane, and water vapor. For graphite, we compare metallic and nonmetallic versions. At the vapor-liquid water and hexa ...
AIP Publishing2022

Effects of surface wettability on (001)-WO3 and (100)-WSe2: A spin-polarized DFT-MD study

Kevin Sivula, Rangsiman Ketkaew

An extensive understanding of WO3 and WSe2 bulk crystalline structures and explicit solvent effects on (001)-WO3 and (100)-WSe2 facets are essential for design of efficient (photo) electrocatalysts. The atomistic level understanding of both WO(3 )and WSe2 ...
ELSEVIER2022

Propulsion and energetics of a minimal magnetic microswimmer

Ignacio Pagonabarraga Mora

In this manuscript we describe the realization of a minimal hybrid microswimmer, composed of a ferromagnetic nanorod and a paramagnetic microsphere. The unbounded pair is propelled in water upon application of a swinging magnetic field that induces a perio ...
ROYAL SOC CHEMISTRY2020
Afficher plus
MOOCs associés (4)
Sorption and transport in cementitious materials
Learn how to study and improve the durability of cementitious materials.
Water quality and the biogeochemical engine
Learn about how the quality of water is a direct result of complex bio-geo-chemical interactions, and about how to use these processes to mitigate water quality issues.
Analyse du cycle de vie environmental
MOOC introduction à la pensée du cycle de vie et aux concepts théoriques pour réaliser et critiquer une analyse du cycle de vie.
Afficher plus

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.