Muscle stem cell's in vitro bipolar niche

In the domain of regenerative medicine research there are many fronts aimed at increasing our understanding of induced pluripotent, embryonic and adult stem cells. Recently a new front has appeared, stem cell niches, the microenvironment that is a crucial component in the regulation of stem cells. New in vitro platforms are continually being created to answer the multitude of biological questions that surround stem cell niches. The transition from in vitro to in vivo is a heavy setback in cellular research due to a huge gap between the two conditions, which can only be reduced if the in vitro conditions better mimic those found in vivo. This project has reduced the gap and has the potential to continue minimizing the differences between the two conditions in the field of muscle stem cell research. Through a combination of the forefront techniques in biological research, we were able to create a new innovative bioengineered platform, a bipolar hydrogel microenvironment. First, we took advantage of polyethylene glycol (PEG) hydrogels, which are highly hydrophilic polymer networks that have properties that mimic physiologic tissue, including high water content and low Young's Modulus. Microfabrication techniques allowed us to topographically pattern the hydrogel at micro-dimensions resembling the native cell environment. Utilizing microfluidics and micro-printing techniques, the three-dimensional hydrogel surface was also patterned with tethered niche proteins found in the in vivo muscle stem cell niche. The swelling properties of the PEG hydrogel were considered as an advantage and controlled to form niche gaps with physical properties that were tuned to correspond to those found in vivo. This new complex and controlled surface for cells to be cultured on is a tool, which will allow biologists to probe new questions and gain insight into the regulatory networks that control cell fate

Bioengineering stem cell niches in 2D and 3D

Nora Leonardi

Muscle degenerative disorders, such as Duchenne muscular dystrophy, have a profound impact on the quality of life and survival of patients. Transplantation of myoblasts to restore muscle function has been discouraging since these cells die and don't migrate but it has more recently been reported that muscle stem cells, known as satellite cells, have an extraordinary potential to contribute to muscle fiber regeneration, home to their niche and replenish the stem cell pool when injected freshly into damaged muscle. These cells however quickly lose their regenerative potential when cultured in vitro. Adult stem cells are known to be regulated by their microenvironment through a complex mixture of signals including soluble factors, matrix bound proteins, neural input and mechanical properties and the identification of extrinsic factors that can regulate muscle stem cell quiescence and self-renewal has been a focus of research in the Blau lab. Strikingly, recent studies in the Blau lab have shown that muscle stem cells cultured on compliant hydrogels coated with laminin were more viable than those cultured on tissue culture plastic and robustly contributed to muscle regeneration when transplanted into irradiated mouse leg muscles. The aim of this project was to follow up on these findings and to further elucidate the role biophysical and biochemical microenvironmental cues play in the regulation of muscle stem cell fate. Hydrogels have emerged as a popular material to recreate the stem cell niche in vitro due to their biocompatibility, high water content, tissue-like elasticity and diffusive properties and were employed here to fabricate substrates of varying rigidities. The physicochemical properties and tethered protein densities of a range of poyl(ethylene glycol) hydrogels were first characterized to define a suitable set of cell culture substrates. Gel stiffness could be linearly modulated from 2.5 to 45 kPa and the ligand density was found to be in the low femtomolar range. ELISA showed similar protein density on gels of different stiffnesses but immunofluorescence could not fully confirm this. Committed myoblasts were then seeded on these gels and shown to respond to substrate stiffness and ligand density in terms of morphology. Lastly, freshly isolated muscle stem cells were cultured on these gels and on rigid tissue culture plastic and shown to spread more, be more viable and grow more rapidly on stiffer gels as compared to soft ones. Myogenic progression was retrospectively analysed using immunohistochemistry but no differences between culture conditions were observed. Based on the influences of gel rigidity and ligand density observed in vitro, an in vivo assay, the ultimate test of stem cell function, is currently underway.

2009

Hydrogel Microfluidics to Control Stem Cell Fate

Steffen Cosson

Biomolecular signaling is of utmost importance in governing many biological processes such as morphogenesis during tissue development where biomolecules regulate key cell-fate decisions. In vivo, these factors are presented in a spatiotemporally tightly controlled fashion and in the context of a soft and hydrated microenvironment. Although state-of-the-art microfluidic technologies allow precise biomolecule delivery in time and space, long-term (stem) cell culture at the micro- scale is far from ideal due to issues related to medium evaporation, limited space for cell growth, shear stress and a lack of cell-instructive microenvironments that might adversely impact cell-fate. As a result, microfluidic cell culture systems are not yet suitable to unravel complex multicellular phenomena. This may explain why they are not yet widely used in biology laboratories. Consequently, the overall goal of this thesis was to overcome this technology gap by developing next generation microfluidics through a combination of microfabrication and smart biomaterials. A special emphasis was placed on decoupling biomolecule presentation at micro-scale from macro-scale cell culture in order to enable long-term stem cell culture within user-friendly multiwell plate formats. First, a novel microfluidic concept was invented to rapidly immobilize linear protein gradients on the surface of poly(ethylene glycol) (PEG)-based hydrogels whose biophysical properties are reminiscent of natural extracellular matrices. This method allows efficient capture of steady-state gradients of tagged proteins (e.g. using Fc or biotin tags) in just a few minutes on engineered hydrogels that display the corresponding auxiliary proteins (e.g. ProteinA or NeutrAvidin). The selectivity and orthogonality of the chosen binding schemes enables the formation of parallel and orthogonal overlapping gradients of multiple proteins, which is impossible using existing platforms. After patterning, the microfluidic chip can be readily removed from the gel for cell culture applications. Using quantitative single-cell time-lapse microscopy, this platform was validated here by probing the effect of fibronectin concentration on the directionality and speed of cell migration. Next, the resolution, flexibility and throughput of the protein patterning on hydrogels was substantially enhanced by the introduction of hydrodynamic flow focusing, that is, the generation of user-defined patterns by spatially controlled step- wise deposition of biomolecules. To this end, a microfluidic device was conceived that enabled the generation of arrays of parallel and crossed overlapping gradients. Application of the platform to generate gradients of immobilized leukemia inhibitory factor (LIF) showed an influence of the LIF concentration on ESC self-renewal. This platform should be useful to systematically probe the effect of biomolecule dose, singly or in combinations, on stem cell behavior in vitro; however, it lacks the ability to dynamically vary the presentation of biomolecules that might be crucial to control stem cell fate towards establishing functional in vitro tissue models. To address this limitation, in the last part of the thesis work a hydrogel-based microfluidic chip was developed that decouples macro-scale cell culture on the gel surface from the precise spatiotemporal biomolecule delivery at the micro-scale, i.e. through the gel layer. The hydrogel chip, used here as a simple insert that is compatible with conventional multiwell plate formats, was optimized to support long- term ESC maintenance in both adherent format and as uniformly sized ESC aggregates termed embryoid bodies. The platform was successfully used for the spatially controlled neuronal commitment of ESC via delivery of gradients of the morphogen retinoic acid. Taken together, in this thesis several innovative microengineered cell culture platforms are presented which enable, perhaps for the first time, the long-term culture and manipulation of stem cell fate at the micro-scale. These systems should be useful to systematically probe in vitro the effect of biomolecule dose and delivery dynamics on stem cell behavior, ultimately facilitating the development of complex in vitro tissue models.

EPFL2012

Bioengineering approaches to emulate the stem cell niche

Sylke Höhnel

Stem cell therapies hold tremendous potential for tissue and organ regeneration. Yet, there remains significant need for better ex vivo culture and manipulation methods. On the one hand, many tissue-specific stem cells cannot be propagated without causing rapid deviations in cellular phenotype. On the other hand, outside of a developing organism, it remains very difficult to differentiate stem cells into mature functional cell types. Such protocols could help to build more effective and predictive pre-clinical models that would reduce or even replace animal studies. Manipulating a stem cell in vitro requires a thorough understanding of its microenvironment, or niche, and how niche factors influence stem cell fate. A customizable microarray platform was therefore developed to examine the interplay of biochemical and mechanical signals on stem cell behavior. This array was implemented to study combinations of 12 different proteins with varying substrate stiffness and their effect on the adipogenic differentiation of human mesenchymal stem cells (MSCs). These cells and their differentiated progenies are of high therapeutic relevance for skeletal tissue regeneration and have also been implied as niche-modulating neighbors of hematopoietic stem cells (HSCs) in the bone marrow (BM). Using this combinatorial approach, substrate stiffness was found to be the major determinant of the frequency of lipid accumulation in MSCs, while the lipid content was found to be strongly driven by the biochemical context. To further understand how niche cells together with stem cells self-organize to form a functional tissue, three-dimensional (3D) organ-mimicking structures from spheroids of pluri- and multi-potent have recently been developed. These systems, termed organoids, are expected to provide instrumental insights into tissue or organ development and they could be of great use for disease-specific drug screenings and to generate clinically transplantable tissues. However, current protocols for organoid generation remain highly inefficient and irreproducible. To perform the high-throughput aggregation of one or multiple cell types and to allow their long-term culture, a high-density array of U-shaped microwells was developed. This platform was used to initiate 3D co-cultures of the hematopoiesis-supportive cell line OP9 together with HSCs. To expand on the potential of this co-culture model to study more relevant primary BM cells, uniform clonal mesensphere cultures from human MSCs were established. However, restricted knowledge about the phenotypic identity of both niche and stem cell is a major limitation to initiate these co-cultures in vitro. Therefore, in this thesis a cell-targeting approach through covalent SNAP-tag-based cell-pairing is proposed. Specifically, SNAP-tag fusion proteins expressed on cell membranes were targeted to form covalent bonds with substrates that harbor the SNAP-tag substrate benzylguanine (BG). Immobilizing sufficient amounts of BG on cellular membranes is a mean to enable cell-cell pairing as demonstrated by the covalent aggregation of microbeads carrying SNAP-tag and BG at high concentrations. The artificial niche models developed in this study are broadly applicable to desired cellular systems. These approaches help to gain insight into the multifactorial composition and architectural organization of specific niches and to enable their reconstruction in vitro.

EPFL2015