Hydration, microstructural development and dimensional stability of cementitious materials made of portland cement clinker and fluoroanhydrite
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The setting of Roman cement is so rapid as to make the use of retardation essential in most practical mortars. This work reports an approach to retardation of Roman cement mortars by means of a pre-hydration process in which pre-determined amounts of water ...
Alkali silica reaction (ASR) is a long-term reaction between certain aggregates containing amorphous silicate phases and the alkalis from the cement paste. These silicates react with the alkalis present in the pore solution of the cement paste and form an ...
This paper focuses on the interactions that occur between cement phases during early hydration, especially between the hydration of alite and C(3)A-gypsum. This study shows that alite reaction is accelerated in the presence of gypsum. This acceleration was ...
Supplementary cementitious materials (SCMs) are widely used to partially replace portland clinker in blended cements. Reducing clinker contents further without compromising the development of early strength necessitates a better assessment and enhancement ...
Supplementary cementitious materials (SCM) are known to reduce or even stop expansion due to alkali silica reaction (ASR) in concretes with reactive aggregates. Studies indicate that the main reason for this is the decrease in alkalinity of the pore soluti ...
This study investigates the coupled substitution of metakaolin and limestone in Portland cement (PC). The mechanical properties were studied in mortars and the microstructural development in pastes by X-ray diffraction, thermogravimetry analysis, mercury i ...
The current state of knowledge of cement hydration mechanisms is reviewed, including the origin of the period of slow reaction in alite and cement, the nature of the acceleration period, the role of calcium sulfate in modifying the reaction rate of tricalc ...
An important microstructural aspect of the early hydration of Portland cement (K) is the formation of a shell of hydration products around cement grains. There is, at present, limited information on the mechanism of formation of the shell and of the chemis ...
The modeling platform µic has been extended to study the hydration of cement based systems. It is shown that the hydration kinetics of alite can be described through the implementation of two mechanisms: a solution controlled dissolution (SCD) mechanism fo ...
Tricalcium aluminate (C3A) is one of the main constituents of Portland cement. Even though it represents less than 10% of the total composition, its strong reaction with water can lead to a rapid setting, called flash set. Gypsum is added to regulate this ...
