**Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?**

Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur GraphSearch.

Publication# Improving the Turbulence Coupling between High Resolution Numerical Weather Prediction Models and Lagrangian Particle Dispersion Models

Résumé

For the modelling of the transport and diffusion of atmospheric pollutants during accidental releases, sophisticated emergency response systems are used. These modelling systems usually consist of three main parts. The atmospheric flow conditions can be simulated with a numerical weather prediction (NWP) model. The evolution of the pollutant cloud is described with a dispersion model of variable complexity. The NWP and the dispersion models have to be coupled with a so-called meteorological pre-processor. This means that all the necessary – in most cases turbulence related – variables which are not available from the standard output of the NWP model have to be diagnosed. The main difficulty of the turbulence coupling is that these subgrid scale variables of NWP models are not routinely verified and thus little is known concerning their quality and impact on dispersion processes. The general aim of the present work is to better understand and improve this coupling mechanism. For this purpose all the three main components of the emergency response system of MeteoSwiss are carefully evaluated and possible improvement strategies are suggested. In the first part, the NWP component of the system, namely the COSMO model, is investigated focusing on the model performance in the Planetary Boundary Layer (PBL). Three case studies, representing both unstable and stable situations, are analyzed and the COSMO simulations are validated with turbulence measurements and Large Eddy Simulation (LES) data. It is shown that the COSMO model is able to reproduce the main evolution of the boundary layer in dry convective situations with the operational parameter setting. However, it is found that the COSMO model tends to simulate a too moist and too cold PBL with shallower PBL heights than observed. During stable conditions the operational parameter setting has to be significantly modified (e.g., the minimum diffusion coefficient) to obtain a good model performance. The turbulence scheme of COSMO, which carries a prognostic equation for Turbulent Kinetic Energy (TKE), is studied in detail to understand the shortcomings of the simulations. The turbulent transport term (third order moment) in the TKE equation is found to be significantly underestimated by the COSMO model during unstable situations. This results in inaccurate TKE profiles and hence missing entrainment fluxes at the top of the PBL. A solution to increase the TKE transport in the PBL is proposed in the present work and evaluated during a three-month continuous period. While improving the TKE profile substantially, the modification is demonstrated to not impair other model output characteristics. The second component of the emergency response system, namely the meteorological pre-processor, is also validated on case studies and a continuous period. The main objective of this analysis is to compare the currently operational coupling approach, which is based on the direct usage of the prognostic TKE from the COSMO model, to a classical approach based on similarity theory considerations, thereby using turbulence measurements on the one hand and LES data on the other hand. To be able to use similarity theory approaches for the determination of turbulence characteristics, the PBL height has first to be diagnosed from the NWP model. In the present study, several approaches for the determination of PBL height have been implemented and validated with radio sounding measurements. Based on the verification results and the operational convenience, the method based on the bulk Richardson number method has been chosen for the diagnosis of the PBL height. Validation results of post-diagnosed turbulence characteristics show that during convective situations, the similarity approach tends to overestimate the turbulence intensity, while the approach based on the direct usage of TKE yields more accurate results. For stable conditions the different approaches are closer to each other and both give reasonable predictions. It is found that the main drawback of the direct approach is the isotropic assumption in the horizontal direction. A new hybrid method is proposed which uses similarity considerations for the partitioning of horizontal TKE between along-wind and cross-wind directions. In the last part, pollutant dispersion in complex terrain is studied using a new scaling approach for TKE that is suited for steep and narrow Alpine valleys. This scaling approach is introduced in the interface between COSMO and a Lagrangian particle dispersion model (LPDM), and its results are compared to those of a classical similarity theory approach and to the operational coupling type, which uses the TKE from the COSMO model directly. For the validation of the modelling system, the TRANSALP-89 tracer experiment is used, which was conducted in highly complex terrain in southern Switzerland. The ability of the COSMO model to simulate the valley-wind system is assessed with several meteorological surface stations. The dispersion simulation is evaluated with the measurements from 25 surface samplers. The sensitivity of the modelling system towards the soil moisture, horizontal grid resolution, and boundary layer height determination is investigated. It is shown that if the flow field is correctly reproduced, the new scaling approach improves the tracer concentration simulation compared to the classical coupling methods.

Official source

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Concepts associés (18)

Simulation des grandes structures de la turbulence

La simulation des grandes structures de la turbulence (SGS ou en anglais LES pour Large Eddy Simulation) est une méthode utilisée en modélisation de la turbulence. Elle consiste à filtrer les petite

Planetary boundary layer

In meteorology, the planetary boundary layer (PBL), also known as the atmospheric boundary layer (ABL) or peplosphere, is the lowest part of the atmosphere and its behaviour is directly influenced

Diffusion de la matière

La diffusion de la matière, ou diffusion chimique, désigne la tendance naturelle d'un système à rendre uniforme le potentiel chimique de chacune des espèces chimiques qu'il comporte.
La diffusion ch

Publications associées (113)

Chargement

Chargement

Chargement

Charles Vivant Ignacio Meneveau, Marc Parlange

A simulation of a diurnal cycle of atmospheric boundary layer (ABL) flow over a homogeneous terrain is performed using large-eddy simulation (LES) with the Lagrangian scale-dependent dynamic subgrid-scale model. The surface boundary condition is derived from the field observations of surface heat flux from the HATS experiment (Horst et al., 2004; Kleissl et al., 2004). The simulation results display good general agreement with previous modeling and experimental studies with regard to characteristic features such as growth of the convective boundary layer by entrainment, nocturnal jet, and multilayered flow structure of the nocturnal regime. To gain a better understanding of the physical parameters affecting the statistics of the flow, we study the dependence of a subgrid parameter (dynamic Smagorinsky coefficient), resolved turbulent kinetic energy, and resolved vertical velocity variance upon atmospheric stability. The profiles of these turbulent variables plotted as a function of Obukhov length show “hysteretic” behavior that implies nonunique dependence. The subsequent use of local Richardson number as the scaling parameter shows a decrease in this “hysteresis,” but there is an increased scatter in the profiles with increasing height. Conversely, profiles plotted as a function of local Obukhov length (based on the fluxes at the local vertical level) show almost no hysteresis, confirming the validity of Nieuwstadt's local scaling hypothesis. Although the local scaling hypothesis was formulated for the stable boundary layer, we find that it applies to the entire stability range of the diurnal cycle.

Chad Higgins, Daniel Nadeau, Eric Richard Pardyjak, Marc Parlange

The parameterization of the atmospheric boundary layer is essential for accurate numerical weather predictions. The near-surface values of air temperature or wind speed for instance are highly dependent on the complex land – atmosphere interactions over heterogeneous terrain. Over such surfaces, several open challenges remain regarding the growth of internal boundary layers, the determination of mixing layer heights and the spatial distribution of heat and momentum fluxes. The large-eddy simulation (LES) code we apply is based on the robust Lagrangian scale-dependent dynamic subgrid-scale model (Bou-Zeid et al., 2005, Physics of Fluids). The flow is driven by a mean pressure gradient expressed in terms of horizontal geostrophic winds. The code is pseudo-spectral with spectral decomposition in the horizontal dimensions. Land surface heterogeneities take the form of spatially distributed patches of surface temperature and roughness derived from satellite imagery and land use analysis. The simulation of the complete diurnal cycle is possible but we restrict our discussion to fully convective conditions. Data from LITFASS – 2003 (Lindenberg Inhomogeneous Terrain Fluxes between Atmosphere and Surface: a long-term Study) are used to validate the simulation results. The LES domain covers a 99-m meteorological tower with turbulent measurements and five surface micrometeorological stations. We investigate the presence of large-scale turbulent structures that are typical for daytime conditions with a particular interest in the blending height. Overall, this study illustrates how important is the accurate parameterization of heterogeneous terrain in studies of the atmospheric boundary layer.

2009Chad Higgins, Daniel Nadeau, Marc Parlange

The parameterization of the atmospheric boundary layer is crucial for accurate numerical weather predictions. Over heterogeneous terrain, several open challenges remain regarding the growth of internal boundary layers, the determination of mixing layer heights and the spatial distribution of heat and momentum fluxes. The large-eddy simulation (LES) code we apply is based on the very robust Lagrangian scale-dependent dynamic subgrid-scale model. The flow is driven by a mean pressure gradient expressed in terms of horizontal geostrophic winds. The code is pseudo-spectral with spectral decomposition in the horizontal dimensions. Land surface heterogeneities take the form of distributed patches of surface temperature and momentum roughness derived from satellite imagery and land use analysis. Although recent developments in the code have enabled the simulation of the complete diurnal cycle, the focus here is restricted to convective conditions. Data from LITFASS 2003 (standing for Lindenberg Inhomogeneous Terrain Fluxes between Atmosphere and Surface: a long-term Study) are utilized to validate the simulation results. The LES domain covers a 99-m meteorological tower with turbulent measurements and a few surface micrometeorological stations. We investigate the presence of large-scale turbulent structures that are typical for daytime conditions with a particular interest in the blending height. Overall, this study illustrates how important is the accurate parameterization of heterogeneous terrain in studies of the atmospheric boundary layer.

2009