Experimental comparisons for bottom reflooding in tight LWHCR and standard LWR geometries
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Nuclear reactors are inherently stochastic systems, in which neutronic and thermal-hydraulic parameters fluctuate continuously even during steady-state conditions. In addition, structural components vibrate due to the coolant hydraulic forces. This stochas ...
In this study, a hypothetical fast spectrum Liquid Fuel Molten Salt Reactor (LFMSR) core is modeled using the multiphysics C++ code GeN-Foam (General Nuclear Foam). GeN-Foam is based on OpenFOAM, a C++ opensource library for solution of continuum mechanics ...
A comprehensive program of integral experiments, largely based on the measurement of reaction rate distributions, was carried out recently in the PROTEUS zero-power research reactor at the Paul Scherrer Institute in Switzerland, employing a fuel lattice re ...
Recent LOCA tests with high burnup fuel at the OECD Halden Reactor Project and at Studsvik demonstrated the susceptibility of the fuel to fragment to small pieces, to relocate and possibly cause a hot-spot effect and to be dispersed in the event of claddin ...
The operation of a reactor on an open but self-sustainable cycle without actinide separation is known as breed-and-burn. It has mostly been envisioned for use in solid-fueled fast-spectrum reactors such as sodium-cooled fast reactors. In this paper the app ...
We demonstrate biogas upgrading towards full CO2 conversion in mild conditions in a three-step reactor system using Ru- and Ni-based catalysts. In each of the three reactor stages, the temperature is carefully controlled, thus optimizing the reaction therm ...
DYN3D is a well-established Light Water Reactor (LWR) simulation tool and is being extended for safety analyses of Sodium cooled Fast Reactors (SFRs) at the Helmholtz-Zentrum Dresden-Rossendorf. This thesis focuses on the first stage of the development pro ...
For an energy source to qualify as sustainable, it must maximize the efficiency with which it uses natural resources while minimizing the amounts of waste it produces. Currently deployed nuclear power plants however use a very limited amount of the energy ...
Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...
A multi-physics solver for nuclear reactor analysis, named GeN-Foam (Generalized Nuclear Foam), has been developed by the Laboratory for Reactor Physics and System Behavior at the EPFL and at the Paul Scherrer Institut (Switzerland). The developed solver c ...
