CATHODOLUMINESCENCE INVESTIGATIONS OF 3-DIMENSIONAL ISLAND FORMATION IN INAS/INP QUANTUM-WELLS
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Strain-compensated InAlAs/lnGaAs HEMT structures, grown on InP substrate, have been investigated in terms of structural and electrical properties. From detailed x-ray diffraction (XRD) investigations the compensation index and the evolution of the strain s ...
Nowadays, most of the natural gas conversion systems available on the market for bifuel vehicles are based on the venturi principle or on the continuous injection principle for the carburation of the engine. Even if the driveability of these systems is sat ...
This thesis deals with the monolithic integration of long wavelength (1.3-1.55 µm) p-i-n photodiodes with HEMT field effect transistors for the realization of wide bandwidth OEIC receivers for lightwave communication systems. Part of this work was carried ...
We report the fabrication and characterization of lateral metal-semiconductor-metal (MSM) photodiodes on an InP substrate. The photoabsorbing layer is made of InGaAs covered by a thin InP Schottky barrier enhancement layer. Schottky contacts for the detect ...
We examine the room-temperature dispersive and non-dispersive cathodoluminescent (CL) signals produced by an n-InP/n(+)-InP homojunction as a function of excitation beam energy. The non-intentionally doped epilayer of the homojunction is thick enough (2.5 ...
Photoluminescence intensity and emission wavelength of InAsP/InGaAsP and InGaAs/InGaAsP multi-quantum well (MQW) laser structures grown by chemical beam epitaxy (CBE) at 460 degrees C and V/III ratio of 2 are considerably affected by annealing at temperatu ...
High strained InxGa1-xAs/GaAs quantum well (QW) structures have been grown by metalorganic molecular beam epitaxy (MOMBE) with the aim of investigating the capability of this epitaxial growth method in terms of thickness control. Emission lines from QWs wi ...
In this letter the liquid phase epitaxial growth of In0.71Ga0.29As0.68P0.32 (lambda(g) = 1.32 mum) single quantum well structures lattice matched to (001) InP substrates is reported. The electrical and optical confinement was formed either by InP or In0.88 ...
We have studied the indium and gallium incorporation during growth by chemical beam epitaxy of GaInAs, GaInP and GaInAsP alloys. TMIn, TEGa, cracked AsH3 and PH3 sources were used. The indium incorporation ratio remains nearly constant over the range of pa ...
When a growth interruption is applied to the top interface of a nominally 3 monolayers (ML) thick InAs quantum well (QW), grown on an InP substrate, the InAs layer relaxes by formation of three-dimensional (3D) islands. The emission from the QW is split in ...
