Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The present work deals with the determination of mechanical properties of materials using instrumented indentation techniques. The main advantage of indentation testing is that it is relatively simple to perform and does not need any special and time-consu ...
The mechanisms of deformation and failure in Al-Si nanocomposites, formed by adding Si particles to Al nanocrystalline materials, are investigated using molecular dynamics. The deformation and fracture mechanisms are found to be different in the Al-Si comp ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
Molecular dynamics is used to examine the deformation and failure of Al-Si interfaces and of nanocomposites consisting of Al and Si nanograins loaded in tension. The modified embedded atom method, is used to describe the forces and energies in the system a ...
Ultra-high performance fiber reinforced concrete (UHPFC) is a new class of materials that combine a very strong and dense cementicious matrix with a high fiber content. UHPFC has a very high compressive strength (in the order of 200 MPa) and a relatively l ...
An assessment of the true stress-true strain relationship has been done by means of tensile and small ball punch tests on austenitic and tempered martensitic steel at room temperature. A finite element model was developed and validated to calculate the for ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
Tensile tests have been performed on replicated aluminum alloy foams of relative density between 4.5% and 8%. During the test the electrical resistance was measured with a four-point set-up and the displacements along the gage section were measured using a ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
