Structure and thermal stability of arc evaporated (Ti0.33Al0.67)(1-x)SixN thin films
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
We measured the ultrafast optical response of metal-dielectric superlattices by broadband all-optical pump-probe spectroscopy. The observed phase of the superlattice mode depends on the probe wavelength, making assignments of the excitation mechanism diffi ...
Ternary Au-Cu-Pt alloys, of unequal gold and copper atomic contents and containing 2.5 wt.% Pt, are ordered isothermally at 250 or 400 degrees C after annealing at 650 degrees C and quenching in water. The alloys are characterized by transmission electron ...
Aluminum rich oxynitride thin films were prepared using pulsed direct current (DC) magnetron sputtering from an Al95.5Cr2.5Si2 (at.%) target. Two series of films were deposited at 400 degrees C and 650 degrees C by changing the O-2/(O-2 + N-2) ratio in the ...
Oxynitride thin films, a novel class of mixed anionic solid structures, have gained an intense interest during recent years related to the unique interplay of oxygen (O) and nitrogen (N) with metals in the material structure. This matter can result in spec ...
FK866 (also named APO866 or WK175) is a potent NAMPT inhibitor being evaluated (Phase II) as a potential anticancer drug. The preparation of the C-iminoribofuranoside analog (2E)-N-[4-(1-benzoylpiperidin-4-yl)butyl]-3-{3-[(2S,3S,4R,5R)-3,4-dihydroxy-5-(hyd ...
Mixed aluminum-chromium oxide coatings in the form of (Al,Cr)(2)O-3 solid solutions have attracted extensive research interest during the past years due to their successful use for challenging wear applications and the comparative ease of their moderate-te ...
This work proposes a strategy to adjust the combination weights of an adaptive network in order to attain both faster convergence during the transient phase and lower mean-square-error during the steady-state phase. Optimal combination weights are designed ...
Precipitation hardening remains an important and efficient way to improve the mechanical resistance of aluminium alloys. In the case of the Al-Mg-Si system (6XXX series), a complex precipitation sequence occurs, which is greatly affected by the presence of ...
In this study, we produced four composite materials with Al-based matrix reinforced by Al-Cu-Fe particles initially of the quasicrystalline (QC) phase. The processing route was a gas-pressure infiltration of QC particle preforms by molten commercial Al and ...
Thermodynamic modeling is a versatile tool for predicting the chemical composition cement during the hydration of cement. The quality of the thermodynamic modeling depends directly on the quality and completeness of thermodynamic database used. One of the ...
