Properties of lanthanum doped BaTiO3 produced from nanopowders
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Two-step sintering of nanocrystalline zirconia powder stabilized with 8 mol% yttria resulted in remarkable enhancement of the electrical conductivity and significant suppression of the accelerated grain growth. The electrical conductivity of the nearly ful ...
The position of (Fe-Zr',(Ti)-V-O(center dot center dot))(center dot) defect complexes in Pb[Zr0.52Ti0.48]O-3 (PZT) piezoelectric ceramics was investigated by means of electron paramagnetic resonance (EPR) spectroscopy. The method of analysis pursued to obt ...
Fe-18CrWTi ODS steels are developed by CEA for the SFR generation IV program. The powders of a Fe-18CrWTi alloy reinforced by Y2O3 by mechanical milling have been annealed at 850 °C, 1100 °C and 1300 °C and their microstructure has been studied by SEM and ...
Stress induced ferroelastic switching may represent an efficient toughening mechanism in piezoelectric-ferroelectric ceramics. During the crack propagation, the high tensional stresses at the crack tip can be partially released by the reorientation of 90 d ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2010
Since the end of the last century, Cu damascene integration scheme has been the favoured choice for advanced interconnect technologies. Indeed, due to the lowest Cu bulk resistivity and to it higher resistance to electromigration, performances enhancement ...
Commercial glass frits (lead borosilicate glasses) were employed as the sintering aids to reduce the sintering temperatures of BST ceramics. The effects of the glass content and the sintering temperature on the microstructures, dielectric properties and tu ...
A method is presented for the simultaneous measurement of relative grain boundary energy and all five macroscopic grain boundary degrees of freedom in leaded copper. When compared to the Wynblatt–Takashima model, results suggest a lowered boundary energy w ...
Microstructures, and especially grain boundary populations, are characterized in a γ/γ′ nickel-base superalloy submitted to various thermomechanical treatments involving hot deformation and subsequent supersolvus annealing. The resulting microstructures co ...
Transparent polycrystalline alumina (PCA) is a promising replacement for sapphire. Its optical properties however are highly dependent on the grain size and residual porosity which need to be controlled for real inline transmittances (RIT), that are high e ...
HPL SA report the modification of the electrochemical performance of lithium manganese phosphate (LiMnPO4) via Mn-site bivalent substitution. Manganese (10%) is substituted with iron, nickel, magnesium, or zinc. These substituents are shown via an X-ray to ...
