Microstructure and mechanical properties of an ODS RAF steel fabricated by hot extrusion or hot isostatic pressing
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The production of reactivated cementitious materials is an option for the recycling of hydrated-cement-rich fines discarded during recycled aggregate production. Reactivation is based on a thermal process where calcium silicate hydrates present in the fine ...
Various thermo-mechanical treatments were applied to refine and homogenise grain size and improve mechanical properties of hot-isostatically pressed (HIP) 14%Cr ODS ferritic steel. The grain size was reduced, improving mechanical properties, tensile streng ...
For the design of SFRC members, the most fundamental material property is its post cracking residual tensile strength. When relying on physical models to describe structural behaviour under load, the material laws must first be accurately established. If t ...
VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS-82013
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
The material characterization of steel fibre reinforced concrete (SFRC), which is required for its implementation in design codes, should be based on nominal properties that describe its post-cracking strength in tension. In the case of brittle and quasi-b ...
We present a process for the production of Cu-Al matrix composites containing between 25 and 30 vol.% in situ Al2O3. The composites are prepared by pressing, heat-treating and hot working blended powders of Cu, Al and CuO packed into copper alloy cans. The ...
The friction stress resulting from alloying elements in industrial alloys is an important strengthening mechanism. Since the preparation of single crystal from industrial material is difficult, no direct measurement of this quantity has been reported in li ...
Oxide dispersion strengthened (ODS) ferritic/martensitic (F/M) steels are promising materials for high temperature applications. The hardening limits from room temperature to 1000 degrees C of one of such steel, ODS EUROFER97, together with the impact of t ...
W-2Y, W-1Y(2)O(3) and W-2Y(2)O(3) materials have been fabricated using two different powder metallurgy methods. While W-2Y and W-1Y(2)O(3) have been fabricated using mechanical alloying and hot isostatic pressing (Hipping), W-2Y(2)O(3) has been fabricated ...
This paper reports on low-temperature and hermetic thin-film indium bonding for wafer-level encapsulation and packaging of delicate and temperature sensitive devices. This indium-bonding technology enables bonding of surface materials commonly used in MEMS ...
