Residual Stresses in DC cast Aluminum Billet: Neutron Diffraction Measurements and Thermomechanical Modeling
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The temperature dependence of residual stresses in a WC-17.8vol.%Co cemented carbide was measured by neutron diffraction. The comparison of the WC lattice parameter within the WC-Co and within stress-free WC reference provides a measurement of lattice elas ...
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
Structural stability issues in planar solid oxide fuel cells (SOFC) arise from the mismatch between the coefficients of thermal expansion (CTE) of the components. The stress state at operating temperature is the superposition of several contributions, whic ...
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
Structural stability issues in planar solid oxide fuel cells (SOFC) arise from the mismatch between the coefficients of thermal expansion (CTE) of the components. The stress state at operating temperature is the superposition of several contributions, whic ...
The determination of the thermal and athermal stress components using relaxation experiments along a stress-strain curve is critically evaluated. Short-term stress-relaxations are performed along the stress-strain curve of single crystals of Ge at 850 K, C ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
The rigid body motion of the workpieces and their elastic-plastic deformations induced during high speed milling of thin-walled parts are the main root causes of part geometrical and dimensional variabilities; these are governed mainly from the choice of p ...
Ultra High Performance Fiber Reinforced Concretes (UHPFRC) present outstanding mechanical properties and a very low permeability. Those characteristics make them very attractive for the rehabilitation of existing structures and the conception of new struct ...
Hot cracking is a spontaneous failure of an alloy during solidification. It is a severe problem for casting industry as it reduces the productivity of cast houses and limits the range of alloys compositions that can be industrially produced. Hot tears occu ...
