Experimental analysis of drilling fiber reinforced composites
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The feasibility of integrating thermoplastic isotactic polypropylene/ montmorillonite nanocomposite matrices into conventional fiber-reinforced composites has been investigated. Two basic processing routes were considered: long glass fiber (GF)-reinforced ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
In the context of sustainable development, building insulation represents a major concern as a means of increasing energy efficiency. In order to comply with new norms such as the Passive House standard, locations where load-bearing components must penetra ...
Gravity-feed drilling is the most commonly used method for micro-hole drilling in glass with spark assisted chemical engraving (SACE). This paper proposes a method allowing the systematic characterization of this drilling method. The influences of voltage, ...
The potential of pulp fiberreinforced thermoplastics is currently not fully explored in composites. One of the main reasons is that pulp fibers are extracted for the use in papermaking and are thus not optimized for use as reinforcements in thermoplastics ...
The stress transfer from broken to unbroken fibers in fiber-reinforced polymer-matrix (PMC) and aluminum-matrix (AMC) composites is studied using a detailed 3D finite element model (FEM) and using the standard shear-lag model (SLM). The stress transfer pre ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
Low-cycle fatigue failure in titanium metal matrix composites is caused by two separate damage mechanisms: fatigue crack growth in the Ti matrix and fiber breakage. Here, a coupled numerical model for predicting both crack growth and fiber breakage is deve ...
Infiltration by a pure matrix in the presence of preform deformation and partial matrix solidification is analyzed using a bounding approach for the preform rheology where solid metal is present. It is found, using parameters for the infiltration of short ...
A low wt. resistant porous glass fiber with a developed sp. surface area of 5-120 times the outer surface of a std. glass fiber, and a material having phys., chem. or biol. reactive properties deposited on the developed surface area of porous glass fiber a ...
(Ecole Polytechnique Federale De Lausanne, Switz.).2000
