Microstructural evolution of a commercial ultrafine alumina powder densified by different methods
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Dynamic Mechanical Analysis was conducted on a polyurethane adhesive at different constant heating rates up to 100°C, covering the glass transition range. Different storage modulus degradation curves were obtained from different heating rates. The differen ...
Metal matrix composites (MMCs) comprising nano/microcrystalline matrices and reinforcements exhibit impressive mechanical behaviors derived by exploiting the size effects due to development of geometrically necessary dislocations. In such nanostructured MM ...
Fe-18CrWTi ODS steels are developed by CEA for the SFR generation IV program. The powders of a Fe-18CrWTi alloy reinforced by Y2O3 by mechanical milling have been annealed at 850 °C, 1100 °C and 1300 °C and their microstructure has been studied by SEM and ...
This paper considers the heating mix of ITER for the two main scenarios. Presently, 73 MW of absorbed power are foreseen in the mix 20/33/20 for ECH, NBI and ICH. Given a sufficient edge stability, Q = 10-the goal of scenario 2-can be reached with 40MW pow ...
Master sintering curve (MSC) was used as a practical approach to analyse the sintering behavior of an ultrafine alumina powder. Non-isothermal sintering was carried out at three heating rates. The concept of the MSC has been used to investigate the effect ...
This paper considers the heating mix of ITER for the two main scenarios. Presently, 73MWof absorbed power are foreseen in the mix 20/33/20 for ECH, NBI and ICH. Given a sufficient edge stability, Q = 10 the goal of scenario 2 can be reached with 40MW power ...
In this work we have studied brittle fracture in high-chromium reduced activation tempered martensitic steels foreseen as structural materials for thermonuclear fusion reactors. Developing the adequate materials that can withstand the severe irradiation co ...
Two-step sintering of nanocrystalline zirconia powder stabilized with 8 mol% yttria resulted in remarkable enhancement of the electrical conductivity and significant suppression of the accelerated grain growth. The electrical conductivity of the nearly ful ...
We construct an approximate analytic expression for the growth of the neck between two sintering roughened crystals in contact with a melt. The result combines recent work on early phase sintering [R.S. Farr, M.J. Izzard, Phys. Rev. E 77 (2008) 041608], an ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
